Troubleshooting
Problem | Suggestion |
|
| |
|
|
|
| |
The announcement | • | When recording the announcement, make sure you speak in a normal tone of voice about nine |
| |
message is not clear. |
| inches from the telephone base. |
|
|
| • Make sure there is no background noise (television, music, traffic, etc.) when recording. |
|
| |
|
|
|
| |
My cordless handset | • | Make sure the power cord is securely plugged into the telephone base. Plug the unit into a |
| |
beeps and is not |
| different working electrical outlet not controlled by a wall switch. |
|
|
performing normally. | • | Move the handset closer to the telephone base. It may be out of range. |
|
|
| • | Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds |
| |
|
| and plug it back in again. Allow up to one minute for the handset and the telephone base to |
| |
|
| synchronize. |
|
|
| • | Other electronic products can cause interference to your cordless telephone. Try installing |
| |
|
| your telephone as far away from these electronic devices as possible: wireless routers, radios, |
| |
|
| radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal |
| |
|
| computers, kitchen appliances and other cordless telephones. |
|
|
|
|
|
| |
Common cure for | • | If the unit is not responding normally, try putting the handset in the telephone base or the |
| |
electronic equipment |
| charger(s). If it does not seem to respond, try the following (in the order listed): |
|
|
| • Disconnect the power to the telephone base. |
|
| |
| • Disconnect the battery on the handset. |
|
| |
| • Wait a few minutes before connecting the power to the telephone base. |
|
| |
| • |
|
| |
| • Wait for the handset to synchronize with the telephone base. Allow up to one minute for this |
| ||
|
| to take place. |
|
|
|
|
|
|
|
|
| www.vtechphones.com | 57 | |