VTech CS5122-3, CS5121-2, CS5121-3, CS5121-4 important safety instructions Redial, Find handset

Telephone operation

Redial

•The telephone stores five most recently dialed telephone numbers on the redial list. When the list is full, the oldest entry is deleted to make room for the new entry.

•Press REDIAL/PAUSE, then press , or REDIAL/PAUSE repeatedly to review the redial list. Press CHAN/REMOVE to delete the displayed number.

•Press /FLASH, then press REDIAL/PAUSE to dial the last telephone number dialed.

-OR-

Press REDIAL/PAUSE, then press , or REDIAL/PAUSE repeatedly until the desired entry displays, then press /FLASH to dial the number.

Find handset

•Press FIND HANDSET on the telephone base to locate the handsets when the telephone is not in use and there is no handset in the telephone base. All handsets will ring and **PAGING** will be displayed on all handset screens.

•Press FIND HANDSET again or put the handset back in the telephone base to stop the paging tone of all handsets.

-OR-

Press OFF on the selected handset or put it back in the charger to stop the paging tone of that particular handset.

14 www.vtechphones.com