VTech CS5121-3, CS5121-2, CS5122-3, CS5121-4 important safety instructions Technical specifications

Page 66

Technical specifications

Frequency control

Crystal controlled PLL synthesizer

 

 

Transmit frequency

Handset: 5857.20-5865.90 MHz

 

Telephone base: 912.75-917.10MHz

 

 

Channels

30

 

 

Nominal effective range

Maximum power allowed by FCC and IC. Actual operating range may vary according

 

to environmental conditions at the time of use.

 

 

Size

Handset: 7.32in X 2.01in X 1.57in (186.0mm X 51.0mm X 40.0mm)

 

Telephone base: 5.95in X 5.34in X 3.70in (151.1mm X 135.6mm X 94.0mm)

 

Charger: 3.19in X 3.62in X 1.97in (81.0mm X 92.0mm X 50.0mm)

 

 

Weight

Handset: 5.14oz (145.6g) (including battery)

 

Telephone base: 9.17oz (260g)

 

Charger: 2.37oz (67.2g)

Power requirements

Handset: 3.6V 400mAh Ni-Cd battery

 

Telephone base: 7.5V AC @ 350mA

 

Charger: 7.5V AC @150mA

 

 

Memory

Handset directory: 20 memory locations (including 9 speed dial entries);

 

up to 24 digits and 14 characters

 

Handset call log: 45 memory locations; up to 11 digits and 15 characters

 

 

www.vtechphones.com

63

Appendix

Image 66
Contents Important safety instructions CongratulationsTable of contents Appendix Parts checklist Getting startedTelephone base and chargers installation Battery installation and charging Mounting bracket installation Wall mounting bracket installationDesktop/tabletop bracket installation Handset layout VOL-/CIDTelephone base layout DeleteTelephone settings Date and timeRinger volume handset RingerDial mode Home area codeLanguage Telephone operation Call waiting Temporary tone dialingRedial Find handsetTransfer an external call Directory Store a directory entryCharacter chart Review the directoryEdit a directory entry DirectoryDelete a directory entry Copy a directory entry into speed dial Dial a number from the directorySpeed dial Store a speed dial entryEdit a speed dial entry Delete a speed dial entry Dial a speed dial numberReassign speed dial locations About caller ID Call log Review the call log Make call log entries ready to dialDial a call log number Save a call log entry to the directory Entries ready to dial section onDelete from the call log Delete an entryCall log display screen messages Displays WhenAnswering system Message capacityActivate the answering system Set the clockAnswering system setup Set number of ringsSet remote access code Set telephone base ringerSet message alert tone Outgoing announcement Play your announcementRecord your own announcement Delete your announcementNew message indication Message playbackOptions during playback Record a memo Delete all messagesRecord and play memos Memo playbackCall screening Call interceptMessage window displays Window displays WhenRemote access Command FunctionHandset display screen messages Appendix Battery Important safety instructions Troubleshooting Problem SuggestionAppendix Connecting To take place Your area. See Dial mode on page 10 to set the dial type Telephone company charges may apply Remove and re-insert the battery System does Troubleshooting Troubleshooting Maintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Technical specifications Index Transfer an external call  91-002141-010-100 User’s manual