![](/images/new-backgrounds/1210615/21061547x1.webp)
Bluetooth
Active devices
Only devices on the active devices list can establish a Bluetooth connection with the telephone base. Although two paired devices can be connected to the telephone base, only one Bluetooth cell phone or a headset can be on a call at a time.
When adding, removing, or replacing a Bluetooth device on the
active devices list, all connected devices will be temporarily disconnected until the procedure is complete. It may take up to two minutes to reconnect.
Review the active devices list
1.Press MENU/SELECT on the handset when it is not in use.
2.Press or
to highlight Bluetooth, then press
MENU/SELECT.
3.Press or
to highlight Active devices, then press
MENU/SELECT.
Connect/Disconnect an active device
While in the active devices menu, you may connect or disconnect your active device.
1.Press MENU/SELECT on the handset when it is not in use.
2.Press or
to highlight Bluetooth, then press
MENU/SELECT.
3.Press or
to highlight Active devices, then press
MENU/SELECT.
4.Press or
to highlight a device when necessary, then press MENU/SELECT.
5.Press or
to highlight Connect/Disconnect (whichever is applicable), then press MENU/SELECT to confirm. The handset displays
Device connected/Device disconnected.
Ans. system Directory Call log Intercom Bluetooth
BLUETOOTH Download dir Add cellular Add headset
Active devices
SELECT DEVICE
1 Headset A
2 Cell Phone AC
Disconnect Remove active
When your active device is connected, you will be prompted to select Disconnect. When your active device is disconnected, you will be prompted to select Connect.
20