Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
1.Press MENU/SELECT.
2.Press 
or 
to highlight Directory, then press MENU/SELECT.
3.Press MENU/SELECT to select Home directory.
4.Press 
or 
to scroll to the desired entry or perform an alphabetical search (page 54).
5.Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
1.Press MENU/SELECT.
2.Press 
or 
to highlight Call log, then press MENU/SELECT.
3.Press 
or 
to scroll to the desired entry.
4.Press MENU/SELECT to dial the displayed number.
To access the redial list while on a call:
1.Press REDIAL/PAUSE.
2.Press 
, 
or REDIAL/PAUSE until the desired number displays, then press MENU/SELECT. If you do not press MENU/SELECT within two seconds, the number displayed will be dialed automatically.
• You cannot edit a directory entry while on a call. For more details about the directory, see page 51.
•You cannot copy a call log entry into the directory while on a call. For more details about call log, see page 58.
•You can only view the numbers in the directory, call log or redial while on a call and cannot erase any entries.
•Press and hold OFF/CLEAR to exit redial, directory or call log while on a call.
45