Telephone operation
Transfer/share a call using intercom
1.During a call, press MENU/SELECT twice to choose >Intercom. The outside call is put on hold automatically.
•If you have a
•If you have more than two handsets, your screen shows
Intercom to:. Use the dialing keys to enter the destination handset number. Your handset screen shows Calling handset X.
The destination handset rings and its screen shows Other handset is calling or Handset X is calling.
2.To answer the intercom call, press 
/FLASH, 
or any of the dialing keys 
) on the destination handset. Both handsets now show Intercom. You can now have a private conversation between the system handsets.
• If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press 
/FLASH or OFF/CLEAR on your originating handset.
•If the destination handset does not answer the intercom call within 100 seconds, is in the directory or call log, or is out of range, your originating handset screen shows Unable to call. Try again and reconnects to the outside call automatically.
3.From this intercom call, you have the following options:
•To transfer the call, press MENU/SELECT twice on the originating handset to choose >Transfer. The originating handset screen shows Call transferred. The destination handset is automatically connected to the outside call.
>Transfer Share call
•To share the call, press MENU/SELECT on the originating handset and then press 
/
VOL or 
VOL/CID to highlight >Share call. Then press MENU/SELECT. Both originating and destination handsets are connected to the outside call.
4.To end the outside call, press OFF/CLEAR or place the handset in the telephone base or charger. The call will not end until all handsets hang up.
26