VTech LS6325-3, LS6325-4, LS6325-5, LS6326-5 user manual Battery

Page 55

Appendix

Battery

It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation	Operating time

While in handset use (talking*)	Up to seven hours

While in speakerphone mode (talking*)	Up to five hours

While not in use (standby**)	Up to seven days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps.

•A battery is properly installed and the screen is blank.

•Low battery or Place in charger shows on the handset screen.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

•Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

51

Image 55

Contents User’s manual Congratulations Table of contents Appendix Answering system operationIndex Getting started Parts checklistTelephone base and charger installation Charge light Battery installationLow battery Battery chargingTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationDelete Telephone base layoutFlash Handset layoutMENU/SELECT Push to Talk PTT Press MENU/SELECT to highlight Ringer volume Telephone settingsRinger volume telephone base Ringer volume handsetPress MENU/SELECT to highlight LCD language To manually turn off these indicatorsLCD language Clear voicemailSet date/time Key toneHome area code CID time synchronizationHome area code, then press MENU/SELECT Website Dial modeTo turn on or off with the telephone base Answering system settingsAnswering system set up Answer ON/OFFNumber of rings Call screeningPress MENU/SELECT to highlight Call screening Message alert tone Remote access codeAnnouncement Press MENU/SELECT to highlight Announcement Play your announcementRecord your own announcement Delete your announcementTelephone operation Temporary ringer silencing MuteTemporary tone dialing Call waiting Find handsetEqualizer Chain dialing To access a number in the directory while on a callTo access a number in the call log while on a call To access a number in the redial list while on a callMultiple handset use Redial listDial a redial entry Delete a redial entryAnswer an incoming call during an intercom call IntercomTransfer/share a call using intercom PTT On/Off Push to talk PTTPress MENU/SELECT or Push to Talk PTT to a single handsetPTT to all handsets Change a one-to-one PTT to intercom Answer PTTTo end or leave PTT End PTTAnswer an incoming call during PTT Make an outgoing call during PTTDirectory Enter Name Store a directory entryCharacters by number of key presses Character chartAlphabetical search Search the directoryDial a directory entry Delete contact? Edit a directory entryDelete from the directory Press MUTE/REMOVE or OFF/CLEAR toMemory match Call logReview the call log Missed calls indicatorDial a call log entry View dialing optionsDisplays Edit Number Save a call log entry to the directoryTo delete all entries Delete from the call logCall log display screen messages To delete one entryAnswering system and voicemail Answering system operationMessage capacity To play messages with the telephone base New message indicationCall intercept Message playbackTo play messages with a handset To delete all messages with a handset Delete all messagesRecord and play memos To delete all messages with the telephone baseWindow display Description Message window displaysCommand Function Remote accessHandset display screen messages AppendixCommunication between handset Telephone base lights Handset and telephone base indicators Handset lightsHandset icons Battery Add and register a handset optional Expand your telephone systemReplace a handset Cannot dial out TroubleshootingMy telephone does not work at all There is no dial toneTelephone does not ring when there is an incoming call Low battery shows on screenCharge light is off My handset beeps and is not performing normally Registration failed appears on the handset Hear other calls when using the telephoneMy caller ID features are not working properly Hear noise on the cordless handset and the keys do not workCannot retrieve voicemail messages Caller ID entries do not match the numbers I need to dialOut of range or No pwr at base shows in the handset screen New voicemail and show on the display and I don’t know whyMessages on the answering system are very difficult to hear Answering system does not respond to remote commandsOutgoing announcement is not clear Answering system does not record messagesCommon cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersTaking care of your telephone MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002897-020-100

Related manuals

Manual 2 pages 59.8 Kb