Cisco Systems 7960G, 7940G manual Including language, font, date and time formatting

Page 62

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone

Network Configuration Menu

Table 4-2

Network Configuration Menu Options (continued)

 

 

 

 

 

 

 

Option

 

Description

To Change

 

 

 

 

SW Port

 

Speed and duplex of the switch port.

1. Scroll to the SW Port Configuration

Configuration

 

If the phone is connected to a switch, you must configure

 

option and then press the Edit softkey.

 

 

 

 

 

 

 

port on the switch to the same speed/duplex as the phone, or

2.

Enter one of these values:

 

 

configure both to auto-negotiate.

 

–

A (Auto Negotiate)

 

 

 

 

 

 

If you change the setting of this option, you must change the

 

– 10H (10-BaseT / half duplex)

 

 

PC Port Configuration option to the same setting.

 

 

 

 

– 10F (10-BaseT / full duplex)

 

 

 

 

 

 

 

 

– 100H (100-BaseT / half duplex)

 

 

 

 

– 100F (100-BaseT / full duplex)

 

 

 

3. Press press the Save softkey.

 

 

 

 

PC Port

 

Speed and duplex of the PC port. Valid values:

1. Scroll to the PC Port Configuration

Configuration

 

If the phone is connected to a switch, you must configure

 

option and then press the Edit softkey.

 

 

 

 

 

 

 

port on the switch to the same speed/duplex as the phone, or

2.

Enter one of these values:

 

 

configure both to auto-negotiate.

 

–

A (Auto Negotiate)

 

 

 

 

 

 

If you change the setting of this option, you must change the

 

– 10H (10-BaseT / half duplex)

 

 

SW Port Configuration option to the same setting.

 

 

 

 

– 10F (10-BaseT / full duplex)

 

 

 

 

 

 

 

 

– 100H (100-BaseT / half duplex)

 

 

 

 

– 100F (100-BaseT / full duplex)

 

 

 

3. Press press the Save softkey.

 

 

 

 

 

TFTP Server 2

 

Optional backup TFTP server that the phone uses if the

1.

Set the Alternate TFTP option to Yes.

 

 

primary TFTP server is unavailable.

2. Scroll to the TFTP Server 2 option,

 

 

 

 

 

 

 

press the Edit softkey, and then enter a

 

 

 

 

new backup TFTP server IP address.

 

 

 

3. Press the Validate softkey, and then

 

 

 

 

press the Save softkey.

 

 

 

 

User Locale

 

User locale associated with the phone user. The user locale

From Cisco Unified Communications

 

 

identifies a set of detailed information to support users,

Manager, choose Device > Phone > Phone

 

 

including language, font, date and time formatting, and

Configuration.

 

 

alphanumeric keyboard text information.

 

 

 

 

 

 

 

Network Locale

 

Network locale associated with the phone user. The network

From Cisco Unified Communications

 

 

locale identifies a set of detailed information that supports

Manager, choose Device > Phone > Phone

 

 

the phone in a specific location, including definitions of the

Configuration.

 

 

tones and cadences used by the phone.

 

 

 

 

 

 

 

User Locale

 

Version of the user locale loaded on the phone.

Display only—cannot configure.

Version

 

 

 

 

 

 

 

 

 

Network Locale

 

Version of the network locale loaded on the phone.

Display only—cannot configure.

Version

 

 

 

 

 

 

 

 

 

 

 

Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)

4-8

OL-15498-01

 

 

Page 61 Page 63
Image 62
Page 61 Page 63
Contents
Americas Headquarters Text Part Number OL-15498-01Copyright 2008 Cisco Systems, Inc. All rights reserved N T E N T S Network Requirements Configuring Security on the Cisco Unified IP Phone ViiPort 1 Network, Port 2 Access, and Port 3 Phone Statistics ViiiCable Specifications E-2 D E Organization OverviewAudience XiiiChapter Description Cisco Unified Communications Manager AdministrationRelated Documentation Cisco Unified IP Phone 7960G/7940G SeriesCisco Unified Communications Manager Business Edition Document ConventionsCisco Product Security Overview Convention DescriptionXvi An Overview of the Cisco Unified IP Phone Cisco Unified IP Phone 7960G An Overview of the Cisco Unified IP Phone Refer Cisco Unified Communications Manager What Networking Protocols Are Used?Networking Protocol Purpose Usage Notes System GuideUDP Related TopicsRelated Topic Feature OverviewConfiguring Telephony Features Understanding Security Features for Cisco Unified IP Phones Providing Users with Feature InformationGuide Topic ReferenceRefer to Cisco Unified Communications Manager Security Refer to Cisco Unified Communications ManagerCommunications Manager Security Guide Overview of Supported Security FeaturesFeature Description Phone section on page 3-10for more informationUnderstanding Security Profiles Identifying Encrypted and Authenticated Phone Calls Security RestrictionsCapf Interaction when the Phone Resets ExampleOL-15498-01 Refer to the Cisco Unified Communications Manager Administration Guide, Directory NumberPurpose For More Information Task Purpose For More Information Administration Guide, Softkey TemplateAdministration Guide URLInstalling Cisco Unified IP Phones Series Phone Guide for Cisco Unified Settings Network ConfigurationRefer to Cisco Unified IP Phone 7960G/7940G Communications Manager 7.0 SccpOL-15498-01 A P T E R Related Topic Providing Power to the Cisco Unified IP Phone Obtaining Additional Information about Power Power GuidelinesPower Outage Power Type GuidelinesUnderstanding Phone Configuration Files URLUnified Communications Manager Security Guide Understanding the Phone Startup ProcessDescription Related Topics Request the configuration file Taps Adding Phones with Auto-RegistrationRequires MAC Method Address? Adding Phones with Auto-Registration and Taps Unified Communications Manager System GuideAdding Phones with BAT Using Cisco Unified IP Phones with Different ProtocolsProcedure Converting a New Phone from Sccp to SIPDeploying a Phone in an Sccp and SIP Environment Converting an In-Use Phone from Sccp to SIPConverting an In-Use Phone from SIP to Sccp Determining the MAC Address for a Cisco Unified IP Phone ParametersSetting Up the Cisco Unified IP Phone Before You BeginNetwork Requirements Cisco Unified Communications Manager ConfigurationNetwork and Access Ports, Handset, Speakerphone, Headset, Speakerphone Network and Access PortsHandset HeadsetAudio Quality Subjective to the User Before You Begin Installing the Cisco Unified IP PhoneProcedure Reference Cisco Unified IP Phones 7960G and 7940G Cable Connections Attaching the Cisco Unified IP Phone Expansion Module Expansion ModuleConfiguring Softkey Templates, Adjusting the Placement of the Cisco Unified IP PhoneAdjusting Cisco Unified IP Phone Footstand and Phone Height Mounting the Phone to the WallVerifying the Phone Startup Process Parts Used in Wall Mounting the Cisco Unified IP PhoneConfiguring Startup Network Settings Configuring Security on the Cisco Unified IP PhoneFrom the phone, choose Settings Security Configuration OL-15498-01 Configuring Network Settings on the Cisco Unified IP Phone Displaying the Network Configuration MenuUnlocking and Locking Options Editing Values Overview of Network Configuration OptionsNetwork Configuration Category Description Menu OptionOption Description To Change Network Configuration MenuPC Vlan Configuration Menu section on Communications Manager Security Guide. For informationManager, choose System Enterprise Communications Manager Options section onSystem Device Pool Manager, choose Device Phone Phone ConfigurationChoose System Enterprise Parameters Including language, font, date and time formatting, Disabling the phone’s ability to accept Gratuitous ARP will Blank Cisco Unified Communications Manager OptionsState Device Pool Communications Manager Administration GuideDesignation Description To Cisco Unified Communications Manager Security GuideOL-15498-01 Configuring Features, Templates, Services, and Users Communications Manager Features and Services Feature Description Configuration ReferenceAdministration Guide, Cisco Unified IP Cisco Unified Communications ManagerAdministration Guide, Configuring Features and Services Guide, BargeFeatures and Services Guide, Call Display Specifying Options that Appear on the UserCommunications Manager System Guide, Call Administration Guide, Configuring CiscoUnified Communications Manager Features Communications Manager System GuideDND Unified Communications ManagerMcid Features and Services Guide, MaliciousAdministration Guide, Message Waiting MlppServices menu on a phone Administration Guide, Conference Bridge Administration Guide, Time PeriodManager Administration Guide Cisco VT Advantage Administration GuideConfiguring Personal Directory Configuring Corporate and Personal DirectoriesConfiguring Corporate Directories Creating Custom Phone RingsModifying Phone Button Templates SynchronizerConfiguring Softkey Templates Setting Up ServicesManaging the User Options Web Pages Giving Users Access to the User Options Web PagesAdding Users to Cisco Unified Communications Manager Procedure OL-15498-01 A P T E R Model Information Screen Status MenuMessage Description Possible Explanation and Action Status Messages ScreenSelect Status Messages Address. See the Network Configuration Menu Communications Manager AdministrationNetwork Configuration Menu section on Adding Phones with Cisco UnifiedConfiguration Menu section on page 4-4section for Configuration Menu section on page 4-4for See the Firmware Versions Screen section onMessage Component Description Network Statistics ScreenSelect Network Statistics Firmware Versions Screen Select Expansion Module Stats Expansion Module Stats ScreenSelect Firmware Versions Call Statistics Screen Select Call StatisticsMonitoring the Voice Quality of Calls section on Voice Quality MetricsMOS LQK Security Configuration Menu CTL File MenuCertificate Icon Trust List Menu Monitoring the Cisco Unified IP Phone Remotely Accessing the Web Page for a Phone Http//IPaddressChoose Device Phone Disabling and Enabling Web Page AccessDevice Information Network Configuration Vlan ID Description Network Statistics Ethernet StatisticsPort 1 Network, Port 2 Access, and Port 3 Phone Statistics Description Device Logs Status Messages Streaming StatisticsStack Statistics Streaming Statistics Area Items Description OL-15498-01 Troubleshooting and Maintenance Resolving Startup ProblemsTroubleshooting and Maintenance Resolving Startup Problems Identifying Error Messages Verifying IP Addressing and Routing Creating a New Configuration File Choose Tools Control Center Feature ServicesVerifying Physical Connection Cisco Unified IP Phone Resets UnexpectedlySymptom Cisco Unified IP Phone Unable to Obtain IP Address Verifying Voice Vlan Configuration Verifying Dhcp SettingsChecking Static IP Address Settings Identifying Intermittent Network OutagesVerifying that the Phones Have Not Been Intentionally Reset Eliminating DNS or Other Connectivity ErrorsTroubleshooting Cisco Unified IP Phone Security Problem Possible CauseOptions section on page 4-2for details General Troubleshooting TipsSummary Explanation Summary Explanation Problem Solution HalfduxcollisionexceedthresholdRestore softkey Resetting or Restoring the Cisco Unified IP PhonePerforming a Basic Reset Default softkeyPerforming a Factory Reset Using the Quality Report Tool Monitoring the Voice Quality of CallsMetric Change Condition Where to Go for More Troubleshooting Information Cleaning the Cisco Unified IP PhoneOL-15498-01 Providing Information to Users Via a Website How Users Get Copies of Cisco Unified IP Phone Manuals How Users Access a Voice Messaging System How Users Configure Personal Directory EntriesPrograms Cisco Systems TabSync Installing the SynchronizerConfiguring the Synchronizer Page OL-15498-01 Features Sccp SIPSIP QRTServices Guide Cisco Unified IP Phone Service ApplicationCisco Unified Communications Manager Features Development Notes for Release 4.13 or laterOL-15498-01 Supporting International Users Adding Language Overlays to Phone ButtonsOL-15498-01 Physical and Operating Environment Specifications Specification Value or RangeNetwork Port Connector Cable SpecificationsNetwork and Access Port Pinouts Access Port ConnectorPin Number Function OL-15498-01 Basic Phone Administration Steps Example User Information for these ProceduresChoose System Ldap Ldap Directory Proceed to Configuring the Phone, page F-3Adding a User From an External Ldap Directory Click Perform Full Sync NowProcedure to Configure Phone Configuring the PhoneProcedure To Select Phone Model and Protocol Example johndoeOL-15498-01 Page OL-15498-01 Choose User Management End User Click Device AssociationsPerforming Final End User Configuration Steps Click Save OL-15498-01 Numerics IN-1IN-2 CapfCDP IN-3 External power IN-4Mlpp B-2 IN-5CDP Dhcp Http RTP Sccp SIP TCP Tftp UDP IN-6QRT B-2 IN-7See Srst IN-8Dhcp DNS IN-9Vlan IN-10
Related manuals
Manual 162 pages 37.83 Kb Manual 62 pages 33.27 Kb Manual 12 pages 47.1 Kb Manual 60 pages 40.48 Kb Manual 20 pages 62.18 Kb Manual 20 pages 35.53 Kb Manual 7 pages 55.37 Kb Manual 2 pages 37.74 Kb