AT&T CL84350 user manual Battery installation and charging, Step

Page 13

Getting started

Battery installation and charging

Install the cordless handset battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the handset charger to charge the battery. For best performance, keep the handset in the handset charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 91 for battery operating times.

If the screen shows Place in charger and flashes, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators and actions to take.

Battery indicators	Battery status	Action

The screen is blank or	Battery has no or very	Charge without interruption until
shows Place in charger and	little charge. The handset	the screen shows Low battery or
(flashing).	cannot be used.	HANDSET X (at least 30 minutes).

The screen shows	Battery has enough charge	Charge without interruption until
Low battery and (flashing).	to be used for a short time.	the screen shows HANDSET X
		(at least 30 minutes).

The screen shows	Battery is charged.	To keep the battery charged,
HANDSET X.		place it in the handset charger
		when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short beeps every minute.

Step 1

Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated.

Step 2

Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.

Image 13

Contents User’s manual Congratulations User’s manual Parts checklistWith caller ID/call waiting Table of contentsMultiple handset use Index Quick reference guide handset QCID/-VOLUMEMain menu Flash MENU/SELECT Quick reference guide telephone baseAvoid placing the telephone base too close to Installation800 222-3111. In Canada, dial 1 866 Telephone base installationCharger installation Step Battery installation and chargingCharge light Step Tabletop to wall mount installation Installation optionsInstallation options Wall mount to tabletop installation Press to Release Menu settings Handset settingsRinger volume Ringer toneTo manually turn off the new voicemail indicators on Voicemail visual message waiting indicatorMENU/SELECT. The screen shows Turn off indicator? LCD languageSet date/time Key toneUse caller ID to automatically set date and time To set the dial mode on a cordless handset Dial modeHome area code To set the home area code on a cordless handsetWebsite Announcement Answering system settings handset onlyTo play your current outgoing announcement To record a new outgoing announcementAnswer on/off To delete your outgoing announcementCall screening To change the settingNumber of rings To set the number of ringsTo change the remote access code Remote access codeMessage alert tone Telephone base settings New voicemail and appear on the telephone base screen To select a language on the telephone baseUse q/CID or p/DIR to scroll to Clr voicemail Turn off indicator?Press q/CID or p/DIR to scroll to Set date/time To set the home area code on the telephone base To set the dial mode on the telephone base Using the telephone base Making a call Using a cordless handsetOn hook dialing predialing Using a cordless handset Making, answering, and ending callsTemporary ringer silencing Ending a call Using a cordless handsetAuto off ClearspeakTM dial-in-base speakerphoneREDIAL/PAUSE RedialExiting the menu Equalizer Handset operationOptions while on calls To access the caller ID history call log while on a call To access the directory while on a callTo access the redial list while on a call To take a call off mute on the telephone baseTemporary tone dialing Handset locator Multiple handset useTo start the paging tone To stop the paging toneIntercom Answer an incoming call during an intercom call Base is callingIts screen shows Handset X is calling Call transfer using intercomTransfer Share call Shared directory About the directoryCapacity Create directory entries To create a new directory entry Using a cordless handsetDial key Robert Brown To add a predialed telephone number to the directory To review directory entries Review directoryTo search by name Search directoryDisplay dial To dial a displayed number from the directory To dial, delete or edit entriesTo delete an entry To edit an entryPress MENU/SELECT to confirm. There is a confirmation tone Information about caller ID with call waiting About caller IDCaller ID history Missed new calls indicatorHow the caller ID history call log works XX Missed callsMemory match Caller ID operationTo review the caller ID history View dialing options Delete entries Dial a call log entrySave a call log entry to the directory Caller ID operation On-screen Reason Message Reasons for missing caller ID informationAnswering system and voicemail About the answering systemAnswering system new message indication XX New messagesMessage capacity Turn the answering system on or off at the telephone baseVoice prompts Call intercept Call screening at the telephone baseBase ringer Temporarily turn off the message alert toneMessage playback When messages are playing on the telephone baseTo listen to messages at the telephone base Options during playbackTo delete all old messages When messages are playing on the cordless handsetTo delete all old messages on the telephone base To delete all old messages on a cordless handsetRecording and playing memos To record a memo Using a cordless handsetTo play back a memo Message counter displays Base message counter displaysRemote commands Remote accessTo remotely reach your answering system Remote access Expansion handset To register a handset to your telephone base Adding and registering handsetsAlternately shows 1.Press HS LOC on base 4sec 2.Then press # on handset before you beginDeregistering a handset Handset screen icons Alert tones and lightsHandset alert tones Telephone base iconsLights Telephone base tonesScreen display messages Handset and telephone base display screen messagesIntercom to Handset and telephone base display screen messages My telephone doesn’t work at all TroubleshootingCannot get a dial tone Cannot dial outBatteries do not hold a charge My cordless handset isn’t performing normallyHear other calls while using my phone Experience poor sound quality when using the speakerphoneTelephone does not ring when there is an incoming call Charge light is off or blinking My calls cut in and out while I’m using my cordless handsetMy caller ID isn’t working System does not receive caller ID when on a callIncomplete messages Difficulty hearing messagesSystem does not answer after the correct number of rings System does not respond to remote commandsSystem does not record messages Cannot retrieve voicemail messages Outgoing announcement is not clearCommon cure for electronic equipment Cleaning your telephone MaintenanceTaking care of your telephone Avoid waterSafety information Important safety informationEspecially about cordless telephones Industry Canada FCC Part 68 and ActaFCC Part What does this limited warranty cover? Limited warrantyHow do you get warranty service? Operation Operating time Technical specificationsIndex Index Action Remote command Remote access wallet cardClearspeakTM is a trademark of Advanced American Telephones