Sony 500 manual Location of the telephone, Product support on the Internet

Page 3

Important information

Location of the telephone

The telephone should be operated in a controlled environment with an ambient temperature between 5°C and 40°C.

To ensure good speakerphone quality, the area in front of the micropho- ne (front right) should be kept clear. The optimum speakerphone dis- tance is 50 cm.

Do not install the telephone in a room where large quantities of dust accumulate; this can considerably reduce the service life of the tele- phone.

Do not expose the telephone to direct sunlight or any other source of heat, as this is liable to damage the electronic components and the plastic casing.

Do not operate the telephone in damp environments, such as ba- throoms.

Product support on the Internet

Information and support for our products can be found on the Internet: http://www.siemens-enterprise.com/.

Technical notes, current information about firmware updates, frequently asked questions and lots more can be found on the Internet at: http://wiki.siemens-enterprise.com/.

3

Image 3
Contents Documentation Trademarks Important informationProduct support on the Internet Location of the telephoneContents Enhanced phone functions Displaying and assigning call charges Not for HiPath 500 Using team functionsTesting the phone Special functions in the LANService General informationAbout this manual Intended use Telephone typeSpeakerphone quality and display legibility Getting to know your OpenStage phone User interface of your OpenStage 15 TProperties of your OpenStage 15 T OpenStage Key Module Navigation keys KeysAudio keys Mailbox key and Menu keyMeaning of LED displays on function keys Programmable function keysKeypad Idle mode DisplayIdle menu Mailbox MessagesVoicemail Busy Caller listProgram/Service Program/Service menuBasic functions Answering a callAnswering a call via the handset Ending a call Suggestions for using speakerphone modeSwitching to speakerphone mode Switching to the handsetMode Deactivating ActivatingDialing with DDS keys Making callsOff-hook dialing On-hook dialingRedialing a number Ending a callDisplaying and dialing saved station numbers Turning the microphone on and off Reject callsCombine the calling parties into a three-party con- ference Switching to the held party alternatingCalling a second party consultation Return to the first partyTransferring a call Using variable call forwarding Call forwardingDeactivating call forwarding Deactivating call forwarding no reply Using call forwarding no reply CfnrStep by step Using callback Storing a callbackAccepting a callback Viewing and deleting a stored callback Deleting a displayed entryEnding retrieval Answering calls Enhanced phone functionsEnabling and disabling handsfree answerback Using the speakerphoneOpening the door with a code at the door Speaking to visitors via the entrance telephoneDeactivating the door opener Activating the door openerCorrecting numbers entered Canceling en-bloc sendingEn-bloc sending/correcting numbers Dialing entered/displayed numbersDialing a station number from the caller list Using the caller listRetrieving the caller list Displaying the call timeEntry you wish to dial appears on the screen Dialing a number from the internal directoryUsing the Ldap directory not for HiPath Result is displayed If no name is foundIf too many names are found Suffix-dialing Making calls using system speed-dial numbersConfigure a speed-dial key Dialing with speed-dial keysIf you make a mistake Talking to your colleague with a speaker callAssigning a station number not for U.S Automatic connection setup hotlineDialing aid from your telephone for another tele- phone Associated dialing/dialing aidDialing aid on the S0 bus Dialing aid at the a/b T/R portEnding the second call and resuming the first one Using call waiting second callDuring a call Ending the first call and answering the waiting callPreventing and allowing call waiting automatic camp-on Turning the call waiting tone on and offSaving a number Retrieving a parked call Parking a callViewing the conference parties Conducting a conferenceIf the second party does not answer Adding up to five parties to a conferenceLeaving a conference Ending a conferenceRemoving the Isdn central office party from the conference Activating tone dialing/DTMF suffix-dialing Consult? 80=Speaker call? Transfer? Send trunk flash not for HiPath If you cannot reach a destination Call waiting camp-onBusy override joining a call in progress Using night answer Configuring function keys Programming the function keysExample Programming the Shift key Saved function LED messages Overview of functionsTrunk group key Programming a procedure key Step by step Configuring repdial keys Deleting function key programming Displaying and assigning call charges For the current callFor all calls and for the last call Dialing with call charge assignment Turning ringer cutoff on and off Privacy/securityActivating/deactivating Do not disturb Silent Monitoring/Secret busy override not for HiPath Caller ID suppressionMonitoring the room Monitoring a roomActivating the telephone to be monitored Deactivating the telephone to be monitoredLocking the telephone to prevent unauthorized use Locking the phoneUnlocking the phone Locking another telephone to prevent unauthorized use Saving your PIN Deleting and checking a saved appointment More functions/servicesAppointments function Saving appointmentsUsing timed reminders Sending a messageCreating and sending a message Calling the sender Viewing and editing incoming messagesDisplaying and deleting messages you have sent Viewing the transmission timeDeleting advisory messages Leaving an advisory messageUsing another telephone like your own for a call Change number exchanged phone/ move/relocate Select and confirm the option shown Activating functions for another telephone Step by step Using functions in Isdn via code dialing keypad dialing Inputs in online mode Inputs in en-bloc modeEnding communication with the application Communicating with PC applications over a Csta interfaceControlling relays only for HiPath Sensors HiPath 33x0/35x0 onlyPaging persons not for U.S., not for HiPath Paging personsAnswering the page from the nearest telephone You belong to multiple groups Using team functionsActivating/deactivating a group call You are part of a hunt group or call groupStep by step Accepting a call for another member of your team Ringing groupRemoving all telephones in a call ringing group Uniform Call Distribution UCD Logging on and off at the beginning and end of your shiftLogging on and off during your shift Turning the night service on and off for UCD Requesting and activating a work timeDisplay the number of waiting calls Leaving hunt group/group call Special functions in the LAN not for HiPathSetting up follow me call forwarding Night answer on? Save? Night answer off? Ringing group =or j Opening a door Setting contrast Individual phone configurationAdjusting the ring tone Adjusting audio settingsAdjusting the receiving volume during a call Adjusting the ring volumeAdjusting the speakerphone to the room acoustics Language for system functionsActivating/deactivating the ringer Phone functions, testing Testing the phoneHiPath Differing display view in aPossible causes Fixing problemsResponding to error messages Contact partner in the case of pro- blemsCaring for your telephone TroubleshootingLabeling keys Deleting Index106 107 108 UCD Overview of functions and codes110 111 112 Siemens Enterprise Communications