Placing the Headset on your Ear
In order to wear the headset please follow these instructions:
1.Place the JABRA BT200 Headset behind your ear.
2.Loop the top of the headset over the top of your ear.
3.Place the MiniGel into your ear canal.
4.The microphone will then be
positioned in the direction of your voice.
Using your JABRA BT200 Headset
Turning your headset ON and OFF
To switch your JABRA BT200 on:
1.Remove the headset from ther charging cradle.
2.Press and hold the
3.Release the Multi-Function Button.
4.The headset will now be switched ON (standby mode) and the indicator light will continue to slow flash every 3 seconds.
To switch your headset off:
1.Press and hold the
2.Release the button. The headset is now turned off and the indicator light will no longer flash.
(Please note you will need to wait at least 5 seconds before switching the headset back on.)
8 | 9 |