| Description |
|
|
Recommendations and safety | |
Caution | Do not install the equipment in a damp room or near a water |
outlet.
The equipment must be used at a temperature between 5 °C and 45 °C.
Telephone connection
CE marking
Maintenance
This equipement can not be connected to the public network. This equipment is designed to be installed with a private swit- ching system of NORTEL NETWORKS M6500 IP PBX and SUCCESSION CSE 6500 ranges.
The voltage on this network is classed TNV1 (Telephone Net- work Voltage) according to standard EN
This certifies the conformity of the equipment with the regulations which apply in accordance with the directive R & TTE 1999/5/EC.
Use a cloth which has been dampened in slightly soapy water, and then wipe with a dry cloth.
Your equipment will retain its new appearance if you do not use any solvents or household cleaning products.
To find out the system's software version
If you are
in any doubt, consult your system operator.
The availability of certain functions described in this guide may depend on the version or configuration of your system. We would advise you to carry out the following test (after connecting the set) to find out the version of the system
to which your set is connected.
- Press the key.
Either the display shows the following:
WHICH DIRECTORY DO YOU WANT TO CONSULT?
Private Abbrev. | Log | Info |
The indications and additional features which are highlighted on a blue background are relevant to you in particular.
Otherwise:
DIAL THE ABBREVIATED NUMBER: _ <
The features highlighted on a blue background in this guide are not available with your current system version.
3