Receiving a call
Using the callback later function
If the correspondent you are calling does not answer, you can temporarily store the number and then redial it with a single key (even if it is not the last number dialed).
Consult your system operator. He will program this function on one of your programmable keys.
Receiving a call
Monday 16 October | 09:26 AM |
Comm | Lang. |
Assistant | Line 1 |
M.Martin | Superv. |
| Line 2 |
| Superv. |
Travel A |
|
Taxi |
|
Bank | Filter |
Home | Forward |
When you receive an incoming call, the set rings and the "Message" lamp flashes.
When the caller is stored in one of the shared directories (internal or external), the display shows the name associated.
C . CHARLES IS CALLING
Divert
Notes:
-Otherwise, the number (or type of line) is shown on the display.
-When the call is a forwarded call, the display informs you.
Receiving a call
from a correspondent in the private directory
When the caller is in your private directory, the display shows the name stored in this directory.
In addition, correspondents contained in list 4 of the private directory are announced by the special ring tone (see the sec- tions on The Private Directory and Settings).
Adjusting ring volume
During the call phase, you can adjust the ring volume.
- Press the or keys in succession to decrease or increase the volume of ring tone (8 levels are available, including silent).
The set stores the last setting chosen.
19