AT&T CL84309, CL84209 Multiple handset use, Handset locator, Phone/Flash, Join a call in progress

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace any handsets.

To start the paging tone:

• Press INTERCOM/HANDSET LOCATOR at the telephone base to start the paging tone on all handsets for 60 seconds. INTERCOM TO: appears on the screen for five seconds before the paging tone is sent to all handsets.

NOTE: If you press		OFF/CLEAR or MUTE/DELETE on a
handset, the ringer of the handset is off, but the page cycle				INTERCOM TO:
continues for the duration of the 60 seconds.
				MSG #
To stop the paging tone:				- -
• Press	PHONE/FLASH,		SPEAKER, or any dial pad
key (0-9, *, or #) on the handset(s),				**PAGING**

–OR–

• Press INTERCOM/HANDSET LOCATOR on the telephone base.

NOTE: The handset ringer volume also determines the volume of the

paging tone. If the handset ringer volume level is set to off, that handset is silent for all calls and paging (page 14).

Join a call in progress

You can conference with another system handset or the telephone base while on a call.

Using a cordless handset:

Press PHONE/FLASH or SPEAKER on another cordless handset.

Press OFF/CLEAR or place the handset in the charger to hang up. The call does not terminate until all handsets and the telephone base hang up.

Using the telephone base:

Lift the corded handset or press SPEAKER on the telephone base.

Place the corded handset in the telephone base or press SPEAKER to hang up. The call does not terminate until all handsets and the telephone base hang up.

NOTE: You can use a maximum of four cordless system handsets and the telephone base at the same time on an outside call.

33