SETTING UP THE CAPTEL FOR 2-LINE USE
NOTE: You must follow this procedure to turn on
Bottom view of CapTel phone
There are two steps to setting up your CapTel. First, set it up in standard mode. Then, activate the
Setup phone for 2-Line
1.Plug the AC adapter cord into the round power jack on the bottom of the CapTel.
2.Plug the first telephone line cord
into the jack marked with the
NOTE: This phone line #1 should be the primary telephone number of your home/office, the phone number you would give to people to call you.
3.Plug the second telephone line cord into the other telephone jack (no symbol) on the bottom of the CapTel.
4.Plug the telephone line cords into the appropriate wall jacks and the AC adapter into an electrical outlet.
34 ■ SETTING UP THE CAPTEL FOR