Ultratec 200 manual Setup the CapTel, For Desktop Use, For Mounting on Wall

Page 9

STEP 2 – Setup the CapTel

For Desktop Use

1.Plug the AC adapter cord into the round power jack on the bottom of the CapTel.

2.Plug the telephone line cord into the first (left) telephone line jack.

3.Attach the desktop/wall footplate, making sure the larger side is along the top edge of the CapTel.

4.Plug the telephone line cord into the wall jack and the AC adapter into an electrical outlet.

For Mounting on Wall

To mount the CapTel on a wall, follow the above instructions with the following changes:

1.Flip the handset hook over so that the hook points up.

2.Plug the 6-inch telephone line cord into the telephone jack.

3.Attach the desktop/wall footplate, making sure the larger side is down.

4.Plug the telephone cord into the wall jack. Then, line up

the holes in the desktop/wall footplate with the studs on the wall. Hook the footplate on the studs and pull down.

NOTE: To personalize the menu settings after setup, see pages 19-24.

To setup CapTel with other devices (such as a signaler or answering machine) see page 46.

To setup CapTel for 2-Line Mode see page 32.

INSTALLATION ■ 7

Image 9

Contents Using Your CapTel IMPORTANT! Dialing 911 in an Emergency Contents CapTel 1-Line Mode OverviewHow Does CapTel Work? TOP View FeaturesDisplay & Display Buttons Volume VOL Button & Slide ControlMenu Button Caption ButtonHold Button Mute for Captioned Calls Tone Slide ControlLoud Ringer Flash Button Non-Captioned Calls OnlySelect a Location Installing CaptelSetup the CapTel For Desktop UseFor Mounting on Wall To Indicate Your Preferred Long Distance Carrier Select One Register Your Long Distance ProviderPlacing a Call with Captions Calling & Answering 1-LINE ModeCapTel 1-Line Answering a Call with Captions 1-Line ModeAnswering a Call Without Captions Placing a Call Without CaptionsAdjusting the Sound Conversation VolumeConversation Tone Using CapTel with Assistive Devices Ringer Pitch & VolumeKnowing What is Happening on the Line Graphic Meters Signal MeterOutgoing Volume Meter Using Calling Features Saving Speed Dial NumbersSpeed Dialing from Memory Adjusting Display Contrast Redialing from MemoryReviewing Captions During a Non-Captioned Call Hold During a Captioned Call MuteUsing Caller ID Incoming CallsUnanswered Calls Menu Settings Save Captions After Hanging UpDisplay Contrast Is a number required to dial an outside line? is displayed Is a Number Required to Dial an Outside Line?Do you have call-waiting? is displayed Do You Have Call-Waiting?Captioning External Answering Machine Messages Captions On/Off Setting Captions OnCaptions Off Ringer Pitch Advanced Calling Using Automated Touchtone SystemsLeaving Messages on Answering Machines Retrieving Your Voice Mail MessagesCalling Another 1-Line CapTel User CapTel to CapTel Dialing 711 1-Line Mode Calling a TTY User Via Traditional RelayDialing the Relay Voice Number Press the Caption VCO mode Dialing 911 in AN Emergency 1-LINE Mode Dialing 911 in AN Emergency Dialing 911 in AN Emergency Using 2-LINECAPTEL Optional Requirements for 2-LINE Captel HOW 2-LINE Captel WorksSetup phone for 2-Line Setting UP the Captel for 2-LINE USEActivate 2-Line Menu Placing a Call with Captions 2-LINE ModeIf the Caption Feature is Off If the Caption Feature is OnTurning Captions ON/OFF During a Call Using CALL-WAITING with 2-LINE CaptelDialing 911 with 2-LINE Captel Dialing 711 with 2-LINE Captel Line Captel Tips & Hints Helpful Tips Problem SolvingThere are errors in the captions Captions seem delayed Helpful Tips How should I introduce CapTel to the people I call? Calling with Your CapTelConnecting an External Signaler or Anwering Machine Special Setup InstructionsUsing a Headset or Neckloop Sharing a Telephone Line JackSpecifications CleaningCare & Repair Index Captioning Service 10, 23, 29, 33Voice Carry Over VCO FCC Information Industry Canada Information Safety Instructions Save These Instructions