Lucent Technologies 954 user manual Telephone Feature Setup, Assign Intercom Number, Set the Clock

Page 12

TELEPHONE FEATURE SETUP

Assign Intercom Number

1Do not lift the handset.

2Press G, *, #.

3Enter two digits (11–22).

4Press I. You will hear a confirmation ring.

NOTE: If you duplicate an intercom number, you’ll hear a warning tone. Repeat Steps 1–4 and assign a different number.

5Pry up the intercom number card cover, write the intercom number on the card, and replace the cover.

Set the Clock.

NOTE: You’ll hear a confirmation tone when you enter numbers correctly. If you make a mistake, press and release Sto start over.

1Press and release S. The screen displays zeros.

2Press and release *for AM or #for PM

— OR —

Go on to Step 3 if you want the clock set to military/European time.

3Enter two digits to set the month (for example, press 03for March).

4Enter two digits to set the date (for example, press 09for the ninth).

5Enter one digit for the day of the week (for example, press 1for Sunday or 5for Thursday).

6Enter two digits for the hour (for example, press 01for one o’clock, or 11for eleven o’clock).

7Enter two digits for the minutes (for example, press 31for :31).

Set Dial Mode

1Press G, *, #, *.

2Press and release 2for tone dialing

— OR —

Press and release 3for pulse dialing.

3Press and release M. You’ll hear a confirmation ring if you’ve entered information correctly.

10

Lucent 0954 book.L1

10

5/7/98, 10:35 AM

Image 12

Contents User’s Manual for Four-Line Intercom/ Speakerphone Philips Consumer Communications L.P. All rights reserved Contents Lucent 0954 book.L1 98, 1034 AM Before YOU Begin Installation Table/Desk InstallationInstall 3 AAA batteries Connect the telephone line cords to the telephoneConnect the power adapter Connect the handset cordCheck for dial tone Wall Installation Reverse the handset tabConnect the power adapter to the telephone Mount the phone on the wall Standard Electrical Outlet Convenience Port Telephone Feature Setup Set Dial ModeAssign Intercom Number Set the ClockSet Up for a Private Line Change Battery DisplaySet for Two or Three Phone Lines Operation Making a Call Call PrivacyLine-In-Use Lights Volume Handset/Speakerphone Volume ControlRinger Volume Turning Ringer OffSwitch Between Lines RedialAuto Redial HoldMute FlashTemporary Tone Dialing Conference CallsDo Not Disturb Transfer a CallTransferring an Announced Call Transferring an Unannounced CallTimer Telephone Memory Storing a Temporary Tone Signal in a Memory Number Directory CardStoring Numbers in Memory Storing a Pause in a Memory NumberIntercom Operation Basic Intercom Operations Making an Intercom Call orAnswering an Intercom Call or Ending an Intercom Call orPaging All Phones Answering an AllpageMaking an Intercom Conference Call Room MonitorCase of Difficulty Intercom Paging Signal Not Received Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure Cannot Use DND, TIMER, Allpage or SETExpanding the 954 System Setup Checklist Setting Up a Fourth Line for Each StationCentrex Operation Enabling/Disabling Attendant StationSetting Ring Delay Duration Answering a Delayed RingAttendant Operation Picking Up Another Station’s Line Page Page