Clarity INT9 manual Method Setup, Supply Frequency

Page 16

Clarity - INT9 A/D converter

Using the INT9 card

Supply Frequency

Allows to change the Mains Supply Frequency Suppression. It is used for suppresing the interference on the specified frequency level. This setting influences the sampling frequency as well.

Note: In most parts of Americas, the 60 Hz Mains frequency is usual, while the rest of the world tends to use 50 Hz Mains frequency (pre-set as default). The 50 Hz frequency is common in countries using 230V power supply, while the 60 Hz is connected to the 117V power supply.

3.2Method Setup

The Method Setup – Acquisition and Method Setup – Measurement dialogs are where the parameters that depend on the type of analysis (measuring conditions) are set and so it is expected that they will be specific for various types of analysis. This is the reason for them to be a part of the method.

Caution! Parameters cannot be changed during analysis.

3.2.1Method Setup - Acquisition

Fig. 10. Method Setup - Acquisition (INT9)

16

Image 16

Contents Clarity Clarity Hardware Page Using multiple INT9 cards Using the INT9 card Brief Description INT9 Acquisition cardHardware and software requirements Advantages of the INT9 A/D converterInstallation Signal cablesINT9 Card Standard cable for Clarity stationStarting marker cables Connection with ChromatographDigital output cables Connecting Clarity to chromatograph Clarity configuration Select the DataApex INT9 A/D Card and pressSetup Control Modules list of the dialog DataApex INT9 A/D Card will appearSystem Configuration multiple Instruments System Configuration two INT9 cards Device Manager two INT9 cards INT9 A/D Card Setup Using the INT9 cardNumber of Channels Inversion of Signal Channel 1 toName BipolarMethod Setup Supply FrequencyRange Select DetectorSample Rate External Start/Stop Start OnlyStart Restart Start StopDigital Inputs and Outputs DownTroubleshooting Locate your problemProblems with INT9 driver Board malfunctionHow to check the INT9 driver Error status of the driverManual Installation of the INT9 drivers Go to Start Programs Accessories System Tools System Restore Reinstallation of drivers in Windows Invoke the Start Control Panel Add/Remove Hardware Select Add/Troubleshoot a device and press the Next button Clarity directory. Then press the Next button Data Acquisition non-functional Data Acquisition Simulated Clarity INT9 A/D converter Troubleshooting Tables and specifications Description of the INT9 card connector MaleParameters of digital Inputs and Outputs INT9 CE Conformity Declaration Technical Data Input impedance Sample rate