Clarity manual Tables and specifications, Description of the INT9 card connector Male

Page 32

Clarity - INT9 A/D converter

Tables and specifications

5 Tables and specifications

5.1Description of the INT9 card connector (Male)

Connector pins:

1H

+ Input of the 1st channel

 

 

1L

- Input of the 1st channel

 

 

AGND1

Ground of the 1st channel

IN1

Digital input (of the 1st channel). Used as an

 

External Start (marker) of the 1st channel

OUT1

1st Digital output

 

Digital outputs are controlled by Event Table,

 

Active Sequence and Digital Output dialog.

DGND

Ground of the digital inputs and outputs.

OUT1S1,

Digital outputs - 1st relay contact.

OUT1S2

Contact is closed when output is at a LOW

 

level.

Fig. 14. Standard INT7-compatible cable for two detectors

32

Image 32
Contents Clarity Clarity Hardware Page Using multiple INT9 cards Using the INT9 card Brief Description INT9 Acquisition cardHardware and software requirements Advantages of the INT9 A/D converterInstallation Signal cablesINT9 Card Standard cable for Clarity stationDigital output cables Connection with ChromatographStarting marker cables Connecting Clarity to chromatograph Clarity configuration Select the DataApex INT9 A/D Card and pressSetup Control Modules list of the dialog DataApex INT9 A/D Card will appearSystem Configuration multiple Instruments System Configuration two INT9 cards Device Manager two INT9 cards Number of Channels Using the INT9 cardINT9 A/D Card Setup Inversion of Signal Channel 1 toName BipolarMethod Setup Supply FrequencySample Rate Select DetectorRange External Start/Stop Start OnlyStart Restart Start StopDigital Inputs and Outputs DownTroubleshooting Locate your problemProblems with INT9 driver Board malfunctionHow to check the INT9 driver Error status of the driverManual Installation of the INT9 drivers Go to Start Programs Accessories System Tools System Restore Reinstallation of drivers in Windows Invoke the Start Control Panel Add/Remove Hardware Select Add/Troubleshoot a device and press the Next button Clarity directory. Then press the Next button Data Acquisition non-functional Data Acquisition Simulated Clarity INT9 A/D converter Troubleshooting Tables and specifications Description of the INT9 card connector MaleParameters of digital Inputs and Outputs INT9 CE Conformity Declaration Technical Data Input impedance Sample rate