Clarity manual How to check the INT9 driver, Error status of the driver

Page 22

Clarity - INT9 A/D converter

Troubleshooting

4.2.1How to check the INT9 driver:

How to check the INT9 driver:

Windows In the Start menu (lower left corner of the screen), select 2000/XP/ Settings – Control Panel, and the System icon; under the

Vista Hardware tab click the Device Manager button and in the resulting list look for the Chromatography Devices - DataApex Acquisition Device Model 9.xx item.

In the following image, all drivers (except for the driver for U-PAD2) are installed correctly.

Fig. 13. Device Manager in Windows XP

Error status of the driver:

•If the “Chromatography Device – DataApex Ac- quisition device, Model 9.xx” - item does not appear, then the driver has not been installed.

Solution: Reinstall the driver manually as described in section 4.3 on pg. 23.

•The driver is installed, but there is a yellow

exclamation mark (or a question mark) over its icon, or it is not behaving as expected. The driver is probably installed incorrectly.

Solution: Uninstall the incorrect driver and install the correct one as described in section 4.3, pg. 23.

•The item does appear, but is displayed with a cross symbol.

Solution:Double-click the item to invoke the General tab and activate the driver by clicking on the Enable this device button.

22

Image 22

Contents Clarity Clarity Hardware Page Using multiple INT9 cards Using the INT9 card Brief Description INT9 Acquisition cardHardware and software requirements Advantages of the INT9 A/D converterINT9 Card InstallationSignal cables Standard cable for Clarity stationStarting marker cables Connection with ChromatographDigital output cables Connecting Clarity to chromatograph Clarity configuration Select the DataApex INT9 A/D Card and pressSetup Control Modules list of the dialog DataApex INT9 A/D Card will appearSystem Configuration multiple Instruments System Configuration two INT9 cards Device Manager two INT9 cards INT9 A/D Card Setup Using the INT9 cardNumber of Channels Name Inversion of SignalChannel 1 to BipolarMethod Setup Supply FrequencyRange Select DetectorSample Rate Start Restart External Start/StopStart Only Start StopDigital Inputs and Outputs DownTroubleshooting Locate your problemProblems with INT9 driver Board malfunctionHow to check the INT9 driver Error status of the driverManual Installation of the INT9 drivers Go to Start Programs Accessories System Tools System Restore Reinstallation of drivers in Windows Invoke the Start Control Panel Add/Remove Hardware Select Add/Troubleshoot a device and press the Next button Clarity directory. Then press the Next button Data Acquisition non-functional Data Acquisition Simulated Clarity INT9 A/D converter Troubleshooting Tables and specifications Description of the INT9 card connector MaleParameters of digital Inputs and Outputs INT9 CE Conformity Declaration Technical Data Input impedance Sample rate