Clarity INT9 manual External Start/Stop, Start Only, Start Restart, Start Stop

Page 18

Clarity - INT9 A/D converter

Using the INT9 card

3.2.2Method Setup - Measurement

Fig. 11. Method Setup - Measurement

External Start/Stop

Enables control from an external signal.

Note: The Input used for an external Start from a chromatograph can be set in the System Configuration dialog (see Fig. 4 on pg. 10).

Start Only

The external signal only starts an analysis. Triggering the input will not influence the acquisition in progress.

Start - Restart

The external signal terminates the analysis in progress and at the same time starts a new one. The first signal starts the analysis; the second signal terminates it and at the same time starts a new one - the so-called continuous measurement.

Start - Stop

The external signal starts and stops an analysis. The first signal starts the analysis; the second signal stops it, etc.

18

Image 18

Contents Clarity Clarity Hardware Page Using multiple INT9 cards Using the INT9 card Brief Description INT9 Acquisition cardHardware and software requirements Advantages of the INT9 A/D converterINT9 Card InstallationSignal cables Standard cable for Clarity stationConnection with Chromatograph Starting marker cablesDigital output cables Connecting Clarity to chromatograph Clarity configuration Select the DataApex INT9 A/D Card and pressSetup Control Modules list of the dialog DataApex INT9 A/D Card will appearSystem Configuration multiple Instruments System Configuration two INT9 cards Device Manager two INT9 cards Using the INT9 card INT9 A/D Card SetupNumber of Channels Name Inversion of SignalChannel 1 to BipolarMethod Setup Supply FrequencySelect Detector RangeSample Rate Start Restart External Start/StopStart Only Start StopDigital Inputs and Outputs DownTroubleshooting Locate your problemProblems with INT9 driver Board malfunctionHow to check the INT9 driver Error status of the driverManual Installation of the INT9 drivers Go to Start Programs Accessories System Tools System Restore Reinstallation of drivers in Windows Invoke the Start Control Panel Add/Remove Hardware Select Add/Troubleshoot a device and press the Next button Clarity directory. Then press the Next button Data Acquisition non-functional Data Acquisition Simulated Clarity INT9 A/D converter Troubleshooting Tables and specifications Description of the INT9 card connector MaleParameters of digital Inputs and Outputs INT9 CE Conformity Declaration Technical Data Input impedance Sample rate