Panasonic KX-TCD420NZ Base Unit Settings, 4 4-digit Base Handset Number Unit PIN

Base Unit Settings

Before programming, please follow steps 1 to 2.

1 2 "INPUT CODE"

Press MENU. Search/Select

"SETTING BS".

Changing Base Unit PIN

The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre.

3 5 4 Current 4-digit Base Unit PIN 5 New 4-digit Base Unit PIN

6 New 4-digit Base Unit PIN again to verify

Call Restriction

You can restrict selected handset(s) from dialling selected phone numbers. You can assign up to 10 call restriction numbers (up to 8 digits). If you dial a restricted number, the call does not connect and restricted number flashes.

3 6 4 4-digit Base	5 Handset Number	6
Unit PIN	Select desired	Press RIGHT.
Factory preset 0000	handset number.*1

Cordless Telephone

7 Phone Number 8				9	Press OFF.
	Enter phone	Press RIGHT.			OR
	number to be				To continue entering call
	restricted.				restriction numbers, repeat
	(up to 8 digits)				the steps 7 to 8.
					(up to 10 numbers)
Cancelling Call Restricted Handset(s)
3	6 4 4-digit Base		5	Handset	6	7
	Unit PIN			Number	Press RIGHT.	Press OFF.
	Factory preset			Select desired
	0000			handset number.*2

•To exit the operation, press any time.

*1 The selected handset number flashes.

*2 The selected handset(s) number(s) will stop flashing.

25