Room monitor
This feature allows you to monitor the room where a unit is located. The monitored unit does not ring, allowing you to easily monitor a baby’s room, for example, from different areas of the house.
Note:
LYou can place the handset on the base unit or charger while monitoring using the speakerphone.
Setting room monitor
To use the room monitor feature, you need to set the destination unit to be monitored beforehand.
–“Off” (Default): denies access from other units.
–“On”: allows the unit to be monitored.
Turn on/off the handset’s room monitor feature
Handset
1 {MENU} i{0}{9}
2 Select the desired setting.
3 {SAVE} i{OFF}
Turn on/off the base unit’s room monitor feature
Handset
1 {MENU} i{0}{*}{3} 2 Select the desired setting.
3 {SAVE} i{OFF}
Monitoring a room
Important:
LBefore using this feature, set room monitor of the destination unit to “On” to allow access by other units.
LIf you receive an outside call while monitoring a room, you hear 2 tones (page 37). To answer the call with the handset, press {LINE1} or {LINE2} that is flashing on the handset. To answer the call with the base unit, press {LINE1} or {LINE2} that is flashing on the base unit.
Handset
1 {INTERCOM} i{MONITOR}
2 To page the base unit, press {0}. To page another handset, enter its extension number ({1} – {8}).
LYou can listen to the audio.
3 Press {OFF} to stop monitoring.
Base unit
1 {INTERCOM} i{MUTE}
2 To page a specified handset, enter its extension number ({1} – {8}).
LYou can listen to the audio.
3 Press {INTERCOM} to stop monitoring.
For assistance, please visit http://www.panasonic.com/phonehelp | 53 |