Panasonic KX-PRW120 Smartphone Connect app, Other network features, Wi-Fi repeater mode

Page 43

Smartphone Integration

performing this procedure, and then change it back when finished.

3MbN: Select your wireless router’s SSID. a MSelectN

4Confirm the SSID and then press MOKN.

5Enter the password required to access the wireless network. a MOKN

R After the base unit connects to the wireless router, “Connected to” and your wireless router’s SSID is displayed.

6MOFFN

Simplified configuration (WPS, DHCP)

This procedure requires a wireless router that supports WPS. If your wireless router supports WPS, make sure the feature is turned on, and locate its WPS button before beginning this procedure. The WPS button is typically labeled “WPS” or has two curved arrows on it.

1MMenuN (right soft key) #523

2MbN: “WPS (Easy setting)” a MSelectN

3Press the WPS button on your wireless router and then press MOKN on the handset.

R The base unit searches for your wireless router and “Searching...” is displayed.

R After the wireless router is found, the base unit’s Wi-Fi settings will be completed automatically. When the setup is complete, “Connected to” and your wireless router’s SSID is displayed.

4MOFFN

Advanced configuration (static IP settings)

After using the procedure explained in “Typical configuration (DHCP)”, page 42 or “Simplified configuration (WPS, DHCP)”, page 43, use the procedure below to set the base unit’s IP settings manually if necessary.

This procedure is not necessary for most users.

1MMenuN (right soft key) #500

2MbN: “Manual (Static)” a MSelectN

3 MbN: Select the desired item. a MSelectN

4Enter the desired setting. a MOKN R Press MFEN to move the cursor if

necessary.

5Set the other items as necessary.

6MbN: “<Save>” a MSelectN a MOFFN

Smartphone Connect app

Once you have configured the base unit’s Wi-Fi and network settings, you are ready to download the Smartphone Connect app. Download information is available at the web page listed below.

www.panasonic.net/pcc/support/tel/air

For information about using the app, refer to the Smartphone Connect App Guide, which is available for download at the web page listed above.

Other network features

Wi-Fi repeater mode

You can increase the signal range of your wireless network by turning on the base unit’s Wi-Fi repeater mode feature.

1MMenuN (right soft key) #538

2MbN: Select the desired setting. a MSaveN

Important:

RIf using Wi-Fi repeater mode, do not place the base unit and your wireless router too close to each other. If they are too close,

For assistance, please visit http://www.panasonic.com/help

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Thank you for purchasing a Panasonic product Premium Design Phone with Smartphone ConnectTable of Contents Other information Accessory informationSupplied accessories Additional/replacement accessoriesYour smartphone 4 max Expanding your phone systemSmartphone Handset optional KX-PRWA10For your safety Base unit location/avoiding noise Important safety instructionsBattery For best performanceRoutine care SpecificationsOther information EnvironmentPower consumption Base unit Wi-FiRF transmission power Dect Power sourceBase unit Setting upBattery installation ConnectionsBattery level Intelligent eco modeBattery charging During a power failureBase unit ControlsDisplay icons HandsetOther settings Language settingDate and time Dialing mode Hold Useful features during a callMaking calls Answering callsHandset clarity booster For call waiting or Call Waiting Caller ID service usersTemporary tone dialing for rotary/pulse service users FlashAnswering an intercom call IntercomTransferring calls, conference calls Making an intercom callErasing the character or number PhonebookAdding phonebook entries Character table for entering namesStoring caller information to the phonebook GroupsFinding and calling from a phonebook entry Editing entriesAdding phone numbers to speed dial keys Speed dialErasing entries Chain dialViewing an entry/Making a call Erasing an entryMenu list Display the menu tree and direct command code tableTime adjustment *1, *3 Caller ID Settings Ring count*1 RingsVoice Mail access Memo alarm Alarm1-5 OnceOn/Off Silent mode 1100 PM/0600 SettingsRing adjustments Ringer volume Silent modeClock*10 AnalogSmall Voice mail Save VM access#*1Display VM tone detect*1 Wallpaper Wallpaper1Wi-Fi settings Connect Set tel line Set dial mode *1 PulseSetting *1, *18 Country code Network settings Current statusOn/Off Battery checkRing adjustments*19 Silent mode On/OffOff AlarmOnce Selecting groups to bypass silent Turning silent mode on/offCall block Changing the start and end timeBlocking incoming calls without phone number Setting the first ring for the call block listBaby monitor Storing unwanted callersTo monitor from an outside line Setting the baby monitorTo monitor with a handset Turning off the baby monitorCalendar/Schedule Other programmingAnswering the baby monitor Changing the handset nameOperating additional units Registering a unitRegistering a handset to the base unit Deregistering a handset Talking Caller ID Using Caller ID serviceCaller ID features Caller listErasing all caller information Caller ID number auto edit featureEditing a caller’s phone number Erasing selected caller informationMemory capacity including your greeting message Using a pre-recorded greeting messageAnswering system Greeting messageListening to messages from the message list Listening to messagesRewinding the message Audible message alert Advanced new message alerting featuresCalling back Caller ID subscribers only Erasing all messagesRemote operation Remote access codeTurning on the answering system remotely Using the answering system remotelyRemote commands Voice guidanceNumber of rings before the unit answers a call Answering system settingsFor voice mail service subscribers Call screeningTypical configuration Dhcp Network settingsSmartphone integration Wi-Fi repeater mode Other network featuresSimplified configuration WPS, Dhcp Advanced configuration static IP settingsConfirming network status Confirming your wireless router’s Wi-Fi signal strengthResetting the base unit’s network settings MbN Select the desired setting a MSelectNListening to voice mail messages Voice mail serviceStoring the voice mail VM access number Voice mail VM tone detectionCause/solution Error messagesDisplay message Menu list TroubleshootingProblem General useMaking/answering calls, intercom Battery rechargeCaller ID/Talking Caller ID Liquid damage Answering systemNetwork connection troubleshooting IP address Failed to connect is displayed Wrong password isCannot obtain IP FCC and other information FCC RF Exposure Warning Conexiones Guía Rápida EspañolaIdioma de la guía de voz Idioma de la pantallaGuardar s OFF Núm Teléfono 1 s Selec Agregar Ent. Nueva s SelecPregunta Causa y solución Preguntas frecuentesOr, send your request by E-mail to Customer servicesOr, contact us via the web at For hearing or speech impaired TTY users, TTYLimited Warranty Coverage Warranty For United States and Puerto RicoParts Labor One 1 Year When you ship the product Limited Warranty Limits And ExclusionsIndex Speaker For your future reference Read troubleshooting page in the Operating Instructions
Top Page Image Contents