Sennheiser 2015 manual Preparing the units for use, Transporting the transmitter and receiver

Page 15

Transport case

Transport holding device

Preparing the units for use

Transmitter and receiver have been adapted by your technical expert to suit your individual applications.

Transporting the transmitter and receiver

In addition to the EZB 2015 system case offering room to store all compo- nents of the system, delivery also includes a transport case. This is suitable for the day-to-day transport of a transmitter and a receiver and of two replacement battery packs.

Push the transmitter and the receiver into the transport holding device as shown on the left. The units fit snugly in the case preventing damage dur- ing transport. It is possible to store the battery packs in the front pocket of the transport case, as well as in the transport holding device.

Inserting the battery pack/batteries (transmitter and receiver)

For powering the units, we recommend using the supplied BA 2015 battery pack. The battery pack can be recharged in the L 2015 charger while remaining in the transmitter or receiver (see operating manual of the charger). If no power supply is available for recharging the battery pack, you can alternatively use 1.5 V AA size batteries.

Press the two unlocking buttons and open the battery compartment cover .

Insert the battery pack or the batteries as shown on the left. Please observe correct polarity when inserting the battery pack or the batte- ries.

Close the battery compartment. The battery compartment cover locks into place with an audible click.

67

Image 15

Contents Mikroport System 209 Bedienungsanleitung105 157Mikroport System Safety instructions Contents 102 Warranty regulationsOperating principle of the 2015 Mikroport System 2015 Mikroport SystemDelivery includes MKE2015 EZB Transport case Transport holding device EZG Operating controls of the EK 2015 receiver Alphanumeric display Battery status indicationAudio signal indication Indications and displays on the receiverDisplay for the RF level Display for lock modeDisplay for the audio level Display for microphone level internal microphoneOperating controls of the SK 2015 transmitter Audio peak indication Red LED flashing Battery pack or the batteriesIndications and displays on the transmitter Mute indicationDisplay for microphone level Display for line levelPreparing the units for use Transporting the transmitter and receiverTransport case Transport holding device Connecting sound sources to the transmitter How to properly use the battery pack or the batteriesConnecting the microphones to the transmitter MKE ME 2015-H Attaching and positioning the microphonesConnecting the receiver to hearing aids or headphones Connecting audio sources to the transmitterConnecting the headphones Wearing the transmitter or receiver around your neck Attaching the transmitter or receiver to clothingUsing the receiver Switching the receiver on/offActivating/deactivating the lock mode Adjusting the level of the received audio signal Adjusting the level of the internal microphoneSwitching the channel Displaying the frequency MIC Operating menu of the EK 2015 receiverUsing the transmitter Switching the transmitter on/offMuting the microphone Activating/deactivating the lock mode Function of the buttons Working with the transmitter’s operating menuPress the / rocker button UP/DOWN to select a menu Adjusting a settingGetting into the operating menu Selecting a menuStoring a setting Overview of menusExiting the operating menu Operating menu Operating menu of the SK 2015 transmitterAdjustment tips for the operating menu of the transmitter Adjusting the microphone sensitivityAdjusting the sensitivity of the line input Switching between the channels Nel that is released on all receiversTion-free Error checklist TroubleshootingFor system planning For the MKE 2015-0 plug-on microphone optional accessoryFor the ME 2015-H headset microphone optional accessory Recommendations and tipsCare and maintenance For optimum receptionFor multi-channel operation Working with the configuration menu Configuration of the units by the technical expertGetting into the configuration menu Exiting the configuration menu Reset Structure of the configuration menu of the EK 2015 receiverAccess Reset Receiver only Adjustment tips for the configuration menuSwitching the internal microphone on or off receiver only Adjusting the squelch threshold receiver onlyReleasing channels for the user Mitter and receiver Press the SET button and the button UP simultaneouslyThen displays the next channel that can be released PlayEntering a name Resetting the unit to the factory-preset default settingsChanging the face plate receiver only Colored battery doors and face platesChanging the battery compartment cover Close the battery compartmentRange C Additional informationChannel bank system Range BHDX noise reduction system RF link Inherent Noise of the RF link TransmitterYou can hear the difference Mikroport System SpecificationsOFF EK 2015 receiverConnector assignment SK 2015 transmitterMm stereo jack plug, unbalanced Mm mono jack plug 102 System variants and accessories 104 NT 3-USGarantiebestimmungen Garanzia prodotti Conditions de garantieDeclaración de garantia Page FCC DMOB2AUWG Opmerking BemerkungNota ObservaciónPage

Related manuals

Manual 4 pages 9.73 Kb