Sennheiser manual Attaching and positioning the microphones, MKE ME 2015-H

Page 17

MKE 2015-2

MKE 2015-0

ME 2015-H

Attaching and positioning the microphones

The MKE 2015-2 clip-on microphone (supplied) and the MKE 2015-0 plug- on microphone (optional accessory) are omni-directional and pick up sound equally from all directions. They are the best choice if movements of the speaker’s head have to be compensated for. However, they should be attached as close as possible to the sound source.

Use the microphone clip to attach the MKE 2015-2 clip-on microphone to clothing (e.g. tie, lapel) at a maximum distance of 9.8 inches from your mouth.

When using the MKE 2015-0 plug-on microphone, wear the transmitter around your neck using the EZG 2015 pouch with neck strap. Adjust the length of the neck strap so that the distance between the microphone and your mouth is 9.8 inches at the most.

You can use the MKE 2015-0 plug-on microphone to transmit the speech of several persons at a time with only one transmitter. Put the transmitter with the plug-on microphone on the table in front of the speaker. The per- son speaking should keep a distance of approx. 9.8 inches to the micro- phone.

The ME 2015-H headset microphone (optional accessory) has a super-car- dioid pick-up pattern.

Adjust the ME 2015-H headset microphone so that a comfortable and secure fit is ensured.

Position the microphone of the headset at the corner of your mouth.

Make sure that the sound inlet is directed towards your mouth. The sound inlet is marked with a little dot.

69

Image 17
Contents Mikroport System 105 Bedienungsanleitung157 209Mikroport System Safety instructions Contents 102 Warranty regulationsOperating principle of the 2015 Mikroport System 2015 Mikroport System2015 EZB Transport case Transport holding device EZG Delivery includesMKE Operating controls of the EK 2015 receiver Audio signal indication Battery status indicationIndications and displays on the receiver Alphanumeric displayDisplay for the audio level Display for lock modeDisplay for microphone level internal microphone Display for the RF levelOperating controls of the SK 2015 transmitter Indications and displays on the transmitter Red LED flashing Battery pack or the batteriesMute indication Audio peak indicationDisplay for microphone level Display for line levelTransport case Transport holding device Preparing the units for useTransporting the transmitter and receiver Connecting the microphones to the transmitter Connecting sound sources to the transmitterHow to properly use the battery pack or the batteries MKE ME 2015-H Attaching and positioning the microphonesConnecting the headphones Connecting the receiver to hearing aids or headphonesConnecting audio sources to the transmitter Wearing the transmitter or receiver around your neck Attaching the transmitter or receiver to clothingActivating/deactivating the lock mode Using the receiverSwitching the receiver on/off Switching the channel Adjusting the level of the received audio signalAdjusting the level of the internal microphone Displaying the frequency MIC Operating menu of the EK 2015 receiverMuting the microphone Using the transmitterSwitching the transmitter on/off Activating/deactivating the lock mode Function of the buttons Working with the transmitter’s operating menuGetting into the operating menu Adjusting a settingSelecting a menu Press the / rocker button UP/DOWN to select a menuExiting the operating menu Storing a settingOverview of menus Operating menu Operating menu of the SK 2015 transmitterAdjusting the sensitivity of the line input Adjustment tips for the operating menu of the transmitterAdjusting the microphone sensitivity Tion-free Switching between the channelsNel that is released on all receivers Error checklist TroubleshootingFor the ME 2015-H headset microphone optional accessory For the MKE 2015-0 plug-on microphone optional accessoryRecommendations and tips For system planningFor multi-channel operation Care and maintenanceFor optimum reception Working with the configuration menu Configuration of the units by the technical expertGetting into the configuration menu Exiting the configuration menu Reset Structure of the configuration menu of the EK 2015 receiverAccess Reset Switching the internal microphone on or off receiver only Adjustment tips for the configuration menuAdjusting the squelch threshold receiver only Receiver onlyReleasing channels for the user Then displays the next channel that can be released Press the SET button and the button UP simultaneouslyPlay Mitter and receiverEntering a name Resetting the unit to the factory-preset default settingsChanging the battery compartment cover Colored battery doors and face platesClose the battery compartment Changing the face plate receiver onlyChannel bank system Additional informationRange B Range CYou can hear the difference HDX noise reduction systemRF link Inherent Noise of the RF link Transmitter Mikroport System SpecificationsOFF EK 2015 receiverMm stereo jack plug, unbalanced Mm mono jack plug 102 Connector assignmentSK 2015 transmitter System variants and accessories 104 NT 3-USGarantiebestimmungen Garanzia prodotti Conditions de garantieDeclaración de garantia Page FCC DMOB2AUWG Nota BemerkungObservación OpmerkingPage
Related manuals
Manual 4 pages 9.73 Kb