Indications and displays on the receiver
Battery status indication
The
3 segments: | capacity approx. 100 % |
|
|
2 segments: | capacity approx. 70 % |
|
|
1 segment: | capacity approx. 30 % |
|
|
Battery status display | LOW BAT (you should immediately |
and red LED flashing: | replace the battery pack or the batteries) |
|
|
Warning indication for missing RF signal
The red LED lights up constantly when no RF signal is being received, e.g. because the microphone of the transmitter is muted.
Audio signal indication
The green LED lights up when an audio signal of sufficient strength (e.g. the voice of the speaker) is being received.
Alphanumeric display
After switching on the receiver, the alphanumeric display first displays the name of the receiver. After approx. three seconds, the standard display appears, indicating the channel bank (1) and the channel (01).
62