Sennheiser 2015 manual Activating/deactivating the lock mode

Page 25

Activating/deactivating the lock mode

The transmitter has a lock mode that prevents accidental programming or switching the power off during operation. However, you can still mute the microphone.

Press the SET button .

Press the button (DOWN) . “LOCK” appears on the display. The lock mode is activated and the lock mode icon appears on the standard display.

To deactivate the lock mode, press the SET button again and keep it pressed.

Press the button (DOWN) . “UNLOCK” appears on the display. The lock mode is deactivated and the lock mode icon disappears from the standard display.

Displaying the frequency

You can display the frequency stored in the selected channel. If you operate your system on one of the channels with a freely selectable frequency (channel bank “U”), this feature is very important as it allows you to check if transmitter and receiver are set to the same frequency.

Press the SET button and keep it pressed.

Press the button (UP) . The current frequency is displayed.

77

Image 25

Contents Mikroport System 105 Bedienungsanleitung157 209Mikroport System Safety instructions Contents 102 Warranty regulationsOperating principle of the 2015 Mikroport System 2015 Mikroport SystemMKE Delivery includes2015 EZB Transport case Transport holding device EZG Operating controls of the EK 2015 receiver Audio signal indication Battery status indicationIndications and displays on the receiver Alphanumeric displayDisplay for the audio level Display for lock modeDisplay for microphone level internal microphone Display for the RF levelOperating controls of the SK 2015 transmitter Indications and displays on the transmitter Red LED flashing Battery pack or the batteriesMute indication Audio peak indicationDisplay for microphone level Display for line levelTransporting the transmitter and receiver Preparing the units for useTransport case Transport holding device How to properly use the battery pack or the batteries Connecting sound sources to the transmitterConnecting the microphones to the transmitter MKE ME 2015-H Attaching and positioning the microphonesConnecting audio sources to the transmitter Connecting the receiver to hearing aids or headphonesConnecting the headphones Wearing the transmitter or receiver around your neck Attaching the transmitter or receiver to clothingSwitching the receiver on/off Using the receiverActivating/deactivating the lock mode Adjusting the level of the internal microphone Adjusting the level of the received audio signalSwitching the channel Displaying the frequency MIC Operating menu of the EK 2015 receiverSwitching the transmitter on/off Using the transmitterMuting the microphone Activating/deactivating the lock mode Function of the buttons Working with the transmitter’s operating menuGetting into the operating menu Adjusting a settingSelecting a menu Press the / rocker button UP/DOWN to select a menuOverview of menus Storing a settingExiting the operating menu Operating menu Operating menu of the SK 2015 transmitterAdjusting the microphone sensitivity Adjustment tips for the operating menu of the transmitterAdjusting the sensitivity of the line input Nel that is released on all receivers Switching between the channelsTion-free Error checklist TroubleshootingFor the ME 2015-H headset microphone optional accessory For the MKE 2015-0 plug-on microphone optional accessoryRecommendations and tips For system planningFor optimum reception Care and maintenanceFor multi-channel operation Working with the configuration menu Configuration of the units by the technical expertGetting into the configuration menu Exiting the configuration menu Reset Structure of the configuration menu of the EK 2015 receiverAccess Reset Switching the internal microphone on or off receiver only Adjustment tips for the configuration menuAdjusting the squelch threshold receiver only Receiver onlyReleasing channels for the user Then displays the next channel that can be released Press the SET button and the button UP simultaneouslyPlay Mitter and receiverEntering a name Resetting the unit to the factory-preset default settingsChanging the battery compartment cover Colored battery doors and face platesClose the battery compartment Changing the face plate receiver onlyChannel bank system Additional informationRange B Range CRF link Inherent Noise of the RF link Transmitter HDX noise reduction systemYou can hear the difference Mikroport System SpecificationsOFF EK 2015 receiverSK 2015 transmitter Connector assignmentMm stereo jack plug, unbalanced Mm mono jack plug 102 System variants and accessories 104 NT 3-USGarantiebestimmungen Garanzia prodotti Conditions de garantieDeclaración de garantia Page FCC DMOB2AUWG Nota BemerkungObservación OpmerkingPage

Related manuals

Manual 4 pages 9.73 Kb