Sennheiser 2015 manual NT 3-US, 104

Page 52

 

Power supply for one L 2015

 

NT 1-US

 

with USA mains connector, 120 V

 

Power supply for three L 2015

 

NT 3-US

 

with USA mains connector, 120 V

KAB 80-E

Connecting cable for hearing aid, binaural,

 

with 2.5 mm jack plug,

cable length: 31.2 inches

KAB 60-E

 

cable length: 23.4 inches

KAB 40-E

 

cable length: 15.6 inches

KA 80-E

Connecting cable for hearing aid, monaural,

 

with 2.5 mm jack plug,

cable length: 31.2 inches

KA 40-E

 

cable length: 15.6 inches

KAB 80-K

Connecting cable for EZI 120 induction couplers, binaural,

 

with 3.5 mm jack plug,

cable length: 31.2 inches

KAB 40-K

 

cable length: 15.6 inches

KA 80-K

Connecting cable for EZI 120 induction couplers, monaural,

 

with 3.5 mm jack plug,

cable length: 31.2 inches

KA 40-K

 

cable length: 15.6 inches

EZT 2015-20-S

Induction neck loop with 3.5 mm jack plug, cable length: 7.8 inches

EZT 2015-60-S

Induction neck loop with 3.5 mm jack plug, cable length: 23.4 inches

EZI 120

Induction coupler for hearing aids without audio input

EZB 2015

System case (for the whole system incl. transport case with transport hold-

 

ing device for transmitter and receiver)

EZG 2015

Pouch with adjustable neck strap for SK 2015 or EK 2015

ETC 2015-01

Set comprising 3 battery compartment covers (for SK 2015 and EK 2015)

 

and 3 front covers (for EK 2015) in yellow, blue and red

MAN 2015 PFM

Instructions for use for System 2015 FM

104

Image 52
Contents Mikroport System Bedienungsanleitung 105157 209Mikroport System Safety instructions Contents Warranty regulations 1022015 Mikroport System Operating principle of the 2015 Mikroport SystemMKE Delivery includes2015 EZB Transport case Transport holding device EZG Operating controls of the EK 2015 receiver Battery status indication Audio signal indicationIndications and displays on the receiver Alphanumeric displayDisplay for lock mode Display for the audio levelDisplay for microphone level internal microphone Display for the RF levelOperating controls of the SK 2015 transmitter Red LED flashing Battery pack or the batteries Indications and displays on the transmitterMute indication Audio peak indicationDisplay for line level Display for microphone levelTransporting the transmitter and receiver Preparing the units for useTransport case Transport holding device How to properly use the battery pack or the batteries Connecting sound sources to the transmitterConnecting the microphones to the transmitter Attaching and positioning the microphones MKE ME 2015-HConnecting audio sources to the transmitter Connecting the receiver to hearing aids or headphonesConnecting the headphones Attaching the transmitter or receiver to clothing Wearing the transmitter or receiver around your neckSwitching the receiver on/off Using the receiverActivating/deactivating the lock mode Adjusting the level of the internal microphone Adjusting the level of the received audio signalSwitching the channel Displaying the frequency Operating menu of the EK 2015 receiver MICSwitching the transmitter on/off Using the transmitterMuting the microphone Activating/deactivating the lock mode Working with the transmitter’s operating menu Function of the buttonsAdjusting a setting Getting into the operating menuSelecting a menu Press the / rocker button UP/DOWN to select a menuOverview of menus Storing a settingExiting the operating menu Operating menu of the SK 2015 transmitter Operating menuAdjusting the microphone sensitivity Adjustment tips for the operating menu of the transmitterAdjusting the sensitivity of the line input Nel that is released on all receivers Switching between the channelsTion-free Troubleshooting Error checklistFor the MKE 2015-0 plug-on microphone optional accessory For the ME 2015-H headset microphone optional accessoryRecommendations and tips For system planningFor optimum reception Care and maintenanceFor multi-channel operation Configuration of the units by the technical expert Working with the configuration menuGetting into the configuration menu Exiting the configuration menu Structure of the configuration menu of the EK 2015 receiver ResetAccess Reset Adjustment tips for the configuration menu Switching the internal microphone on or off receiver onlyAdjusting the squelch threshold receiver only Receiver onlyReleasing channels for the user Press the SET button and the button UP simultaneously Then displays the next channel that can be releasedPlay Mitter and receiverResetting the unit to the factory-preset default settings Entering a nameColored battery doors and face plates Changing the battery compartment coverClose the battery compartment Changing the face plate receiver onlyAdditional information Channel bank systemRange B Range CRF link Inherent Noise of the RF link Transmitter HDX noise reduction systemYou can hear the difference Specifications Mikroport SystemEK 2015 receiver OFFSK 2015 transmitter Connector assignmentMm stereo jack plug, unbalanced Mm mono jack plug 102 System variants and accessories NT 3-US 104Garantiebestimmungen Conditions de garantie Garanzia prodottiDeclaración de garantia Page FCC DMOB2AUWG Bemerkung NotaObservación OpmerkingPage
Related manuals
Manual 4 pages 9.73 Kb