Sennheiser 2015 manual Using the receiver, Switching the receiver on/off

Page 20

Using the receiver

After you have switched on the receiver, it can then be operated with the SET button and the / rocker button (UP/DOWN) , making it very easy to use for children. All settings become effective immediately. The dis- play then switches back to the standard display.

Switching the receiver on/off

Press the ON/OFF button to switch the receiver on. The name of the receiver is displayed for approx. three seconds and then switches to the standard display.

To switch the receiver off, press the ON/OFF button until “OFF” appears on the display.

Activating/deactivating the lock mode

The receiver has a lock mode that prevents accidental programming or switching off during operation.

Press the SET button and keep it pressed.

Press the button (DOWN) . “LOCK” appears on the display. The lock mode is activated and the lock mode icon appears on the standard display.

To deactivate the lock mode, press the SET button again and keep it pressed.

Press the button (DOWN) . “UNLOCK” appears on the display. The lock mode is deactivated and the lock mode icon disappears from the standard display.

72

Image 20

Contents Mikroport System Bedienungsanleitung 105157 209Mikroport System Safety instructions Contents Warranty regulations 1022015 Mikroport System Operating principle of the 2015 Mikroport System2015 EZB Transport case Transport holding device EZG Delivery includesMKE Operating controls of the EK 2015 receiver Battery status indication Audio signal indicationIndications and displays on the receiver Alphanumeric displayDisplay for lock mode Display for the audio levelDisplay for microphone level internal microphone Display for the RF levelOperating controls of the SK 2015 transmitter Red LED flashing Battery pack or the batteries Indications and displays on the transmitterMute indication Audio peak indicationDisplay for line level Display for microphone levelTransport case Transport holding device Preparing the units for useTransporting the transmitter and receiver Connecting the microphones to the transmitter Connecting sound sources to the transmitterHow to properly use the battery pack or the batteries Attaching and positioning the microphones MKE ME 2015-HConnecting the headphones Connecting the receiver to hearing aids or headphonesConnecting audio sources to the transmitter Attaching the transmitter or receiver to clothing Wearing the transmitter or receiver around your neckActivating/deactivating the lock mode Using the receiverSwitching the receiver on/off Switching the channel Adjusting the level of the received audio signalAdjusting the level of the internal microphone Displaying the frequency Operating menu of the EK 2015 receiver MICMuting the microphone Using the transmitterSwitching the transmitter on/off Activating/deactivating the lock mode Working with the transmitter’s operating menu Function of the buttonsAdjusting a setting Getting into the operating menuSelecting a menu Press the / rocker button UP/DOWN to select a menuExiting the operating menu Storing a settingOverview of menus Operating menu of the SK 2015 transmitter Operating menuAdjusting the sensitivity of the line input Adjustment tips for the operating menu of the transmitterAdjusting the microphone sensitivity Tion-free Switching between the channelsNel that is released on all receivers Troubleshooting Error checklistFor the MKE 2015-0 plug-on microphone optional accessory For the ME 2015-H headset microphone optional accessoryRecommendations and tips For system planningFor multi-channel operation Care and maintenanceFor optimum reception Configuration of the units by the technical expert Working with the configuration menuGetting into the configuration menu Exiting the configuration menu Structure of the configuration menu of the EK 2015 receiver ResetAccess Reset Adjustment tips for the configuration menu Switching the internal microphone on or off receiver onlyAdjusting the squelch threshold receiver only Receiver onlyReleasing channels for the user Press the SET button and the button UP simultaneously Then displays the next channel that can be releasedPlay Mitter and receiverResetting the unit to the factory-preset default settings Entering a nameColored battery doors and face plates Changing the battery compartment coverClose the battery compartment Changing the face plate receiver onlyAdditional information Channel bank systemRange B Range CYou can hear the difference HDX noise reduction systemRF link Inherent Noise of the RF link Transmitter Specifications Mikroport SystemEK 2015 receiver OFFMm stereo jack plug, unbalanced Mm mono jack plug 102 Connector assignmentSK 2015 transmitter System variants and accessories NT 3-US 104Garantiebestimmungen Conditions de garantie Garanzia prodottiDeclaración de garantia Page FCC DMOB2AUWG Bemerkung NotaObservación OpmerkingPage

Related manuals

Manual 4 pages 9.73 Kb