How to properly use the battery pack or the batteries
For battery pack operation, only use the BA 2015 battery pack in order to ensure optimum operational reliability. Batteries and rechargeable battery cells have different discharging curves. Transmitter and receiver are able to identify the BA 2015 battery pack and to use it to full capacity. They also adapt the battery status display according to the type of power supply used (batteries or battery pack). Individual rechargeable battery cells will not be identified as battery packs.
After use (e.g. during the night), charge the BA 2015 battery pack of the transmitter or receiver in the L 2015 charger. The maximum char- ging time is 2.5 hours, at which time the unit then switches to trickle charging.
If you do not use the transmitter or receiver for extended periods of time (e.g. while you are on holiday), remove the battery pack or the batteries. After three months at the latest, the battery packs will need a refresh charge in the L 2015 charger. This prevents damage to the battery pack due to
Connecting sound sources to the transmitter
Connecting the microphones to the transmitter
In addition to the supplied MKE
Connect the 2.5 mm jack plug of the microphone or the microphone cable to the transmitter’s 2.5 mm jack socket (MIC) .
Via the operating menu, adjust the sensitivity of the microphone input (see “Adjusting the microphone sensitivity“ on page 82).
68