Sennheiser 2015 Colored battery doors and face plates, Changing the battery compartment cover

Page 45

Colored battery doors and face plates

For an integrative teaching approach with several children and the teacher it is important that the children and the teacher distinguish their units eas- ily. Colored battery doors (ordered separately) are available for both the transmitter and receiver. The receivers face plate can also be replaced with colored ones (ordered separately). (see “System variants and accessories“ on page 103).

Changing the battery compartment cover

Press the two unlocking buttons and open the battery compartment cover .

Insert a thin screwdriver into the small recess between the front cover and the lower part of the housing.

Carefully lever out the front cover on both sides.

First insert the colored front cover into the recess on the upper end of the battery compartment and then press it down onto the housing.

Close the battery compartment.

Changing the face plate (receiver only)

Press the two unlocking buttons and open the battery compartment cover .

Use a thin screwdriver to push out the pin of the battery compartment cover.

Replace the battery compartment cover with a colored one.

Push the pin back in.

Close the battery compartment.

97

Image 45

Contents Mikroport System 105 Bedienungsanleitung157 209Mikroport System Safety instructions Contents 102 Warranty regulationsOperating principle of the 2015 Mikroport System 2015 Mikroport SystemDelivery includes MKE2015 EZB Transport case Transport holding device EZG Operating controls of the EK 2015 receiver Audio signal indication Battery status indicationIndications and displays on the receiver Alphanumeric displayDisplay for the audio level Display for lock modeDisplay for microphone level internal microphone Display for the RF levelOperating controls of the SK 2015 transmitter Indications and displays on the transmitter Red LED flashing Battery pack or the batteriesMute indication Audio peak indicationDisplay for microphone level Display for line levelPreparing the units for use Transporting the transmitter and receiverTransport case Transport holding device Connecting sound sources to the transmitter How to properly use the battery pack or the batteriesConnecting the microphones to the transmitter MKE ME 2015-H Attaching and positioning the microphonesConnecting the receiver to hearing aids or headphones Connecting audio sources to the transmitterConnecting the headphones Wearing the transmitter or receiver around your neck Attaching the transmitter or receiver to clothingUsing the receiver Switching the receiver on/offActivating/deactivating the lock mode Adjusting the level of the received audio signal Adjusting the level of the internal microphoneSwitching the channel Displaying the frequency MIC Operating menu of the EK 2015 receiverUsing the transmitter Switching the transmitter on/offMuting the microphone Activating/deactivating the lock mode Function of the buttons Working with the transmitter’s operating menuGetting into the operating menu Adjusting a settingSelecting a menu Press the / rocker button UP/DOWN to select a menuStoring a setting Overview of menusExiting the operating menu Operating menu Operating menu of the SK 2015 transmitterAdjustment tips for the operating menu of the transmitter Adjusting the microphone sensitivityAdjusting the sensitivity of the line input Switching between the channels Nel that is released on all receiversTion-free Error checklist TroubleshootingFor the ME 2015-H headset microphone optional accessory For the MKE 2015-0 plug-on microphone optional accessoryRecommendations and tips For system planningCare and maintenance For optimum receptionFor multi-channel operation Working with the configuration menu Configuration of the units by the technical expertGetting into the configuration menu Exiting the configuration menu Reset Structure of the configuration menu of the EK 2015 receiverAccess Reset Switching the internal microphone on or off receiver only Adjustment tips for the configuration menuAdjusting the squelch threshold receiver only Receiver onlyReleasing channels for the user Then displays the next channel that can be released Press the SET button and the button UP simultaneouslyPlay Mitter and receiverEntering a name Resetting the unit to the factory-preset default settingsChanging the battery compartment cover Colored battery doors and face platesClose the battery compartment Changing the face plate receiver onlyChannel bank system Additional informationRange B Range CHDX noise reduction system RF link Inherent Noise of the RF link TransmitterYou can hear the difference Mikroport System SpecificationsOFF EK 2015 receiverConnector assignment SK 2015 transmitterMm stereo jack plug, unbalanced Mm mono jack plug 102 System variants and accessories 104 NT 3-USGarantiebestimmungen Garanzia prodotti Conditions de garantieDeclaración de garantia Page FCC DMOB2AUWG Nota BemerkungObservación OpmerkingPage

Related manuals

Manual 4 pages 9.73 Kb