Sennheiser 2015 Using the transmitter, Switching the transmitter on/off, Muting the microphone

Page 24

Using the transmitter

Switching the transmitter on/off

Press the ON/OFF button to switch the transmitter on. The name of the transmitter is displayed for approx. three seconds and then switches to the standard display.

To switch the transmitter off, press the ON/OFF button until “OFF” appears on the display.

Note:

The transmitter can only be switched off when the standard display is shown on the display panel. When in the operating menu, briefly pres- sing the ON/OFF button will cancel your entry (ESC function) and return you to the standard display with the last stored settings.

Muting the microphone

The transmitter has a MUTE switch that noiselessly mutes the trans- mitted microphone signal. This switch does not switch off the transmit- ter.

Set the MUTE switch to the position “MUTE”. The red LED lights up.

Set the MUTE switch back to the original position to activate the micro- phone signal.

76

Image 24

Contents Mikroport System Bedienungsanleitung 105157 209Mikroport System Safety instructions Contents Warranty regulations 1022015 Mikroport System Operating principle of the 2015 Mikroport SystemDelivery includes MKE2015 EZB Transport case Transport holding device EZG Operating controls of the EK 2015 receiver Battery status indication Audio signal indicationIndications and displays on the receiver Alphanumeric displayDisplay for lock mode Display for the audio levelDisplay for microphone level internal microphone Display for the RF levelOperating controls of the SK 2015 transmitter Red LED flashing Battery pack or the batteries Indications and displays on the transmitterMute indication Audio peak indicationDisplay for line level Display for microphone levelPreparing the units for use Transporting the transmitter and receiverTransport case Transport holding device Connecting sound sources to the transmitter How to properly use the battery pack or the batteriesConnecting the microphones to the transmitter Attaching and positioning the microphones MKE ME 2015-HConnecting the receiver to hearing aids or headphones Connecting audio sources to the transmitterConnecting the headphones Attaching the transmitter or receiver to clothing Wearing the transmitter or receiver around your neckUsing the receiver Switching the receiver on/offActivating/deactivating the lock mode Adjusting the level of the received audio signal Adjusting the level of the internal microphoneSwitching the channel Displaying the frequency Operating menu of the EK 2015 receiver MICUsing the transmitter Switching the transmitter on/offMuting the microphone Activating/deactivating the lock mode Working with the transmitter’s operating menu Function of the buttonsAdjusting a setting Getting into the operating menuSelecting a menu Press the / rocker button UP/DOWN to select a menuStoring a setting Overview of menusExiting the operating menu Operating menu of the SK 2015 transmitter Operating menuAdjustment tips for the operating menu of the transmitter Adjusting the microphone sensitivityAdjusting the sensitivity of the line input Switching between the channels Nel that is released on all receiversTion-free Troubleshooting Error checklistFor the MKE 2015-0 plug-on microphone optional accessory For the ME 2015-H headset microphone optional accessoryRecommendations and tips For system planningCare and maintenance For optimum receptionFor multi-channel operation Configuration of the units by the technical expert Working with the configuration menuGetting into the configuration menu Exiting the configuration menu Structure of the configuration menu of the EK 2015 receiver ResetAccess Reset Adjustment tips for the configuration menu Switching the internal microphone on or off receiver onlyAdjusting the squelch threshold receiver only Receiver onlyReleasing channels for the user Press the SET button and the button UP simultaneously Then displays the next channel that can be releasedPlay Mitter and receiverResetting the unit to the factory-preset default settings Entering a nameColored battery doors and face plates Changing the battery compartment coverClose the battery compartment Changing the face plate receiver onlyAdditional information Channel bank systemRange B Range CHDX noise reduction system RF link Inherent Noise of the RF link TransmitterYou can hear the difference Specifications Mikroport SystemEK 2015 receiver OFFConnector assignment SK 2015 transmitterMm stereo jack plug, unbalanced Mm mono jack plug 102 System variants and accessories NT 3-US 104Garantiebestimmungen Conditions de garantie Garanzia prodottiDeclaración de garantia Page FCC DMOB2AUWG Bemerkung NotaObservación OpmerkingPage

Related manuals

Manual 4 pages 9.73 Kb