Uniden EXS 2050 Choose the dialing mode, If your dialing system is Set the switch to Tone, Pulse

Page 10

Use only the supplied AD-420

AC adapter. Do not use any other Polarity of the plug AC adapter.

Connect the AC adapter to a continuous power supply.

Place the base unit close to the

AC outlet so that you can unplug the

AC adapter easily.

If your telephone outlet isn't modular,	Modular
contact your telephone company for
contact your telephone company for
assistance.

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the PULSE-TONEswitch as follows:

If your dialing system is	Set the switch to

Tone	TONE

Pulse	PULSE

If you aren't sure of your dialing system

Make a trial call with the PULSE-TONEswitch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

7

Image 10

Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Base unit Read this firstHandset Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneCleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsMaking a call Other OperationsFrom the base Receiving a callFrom the handset Ringer muteAdjusting the volume Handset ringer tone and volumeRedialing a call Flash and Call WaitingMute Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number When speaking on the base When speaking on the handsetWay conferencing Integrated answering device Setting up your answering system Turning the answering system on/offRecording a personal outgoing message Greeting Setting your greetingPreset Message Choosing between the two outgoing messagesSelecting the message record time Announce only featureSelecting a PIN code Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting individual messages Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code To attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you K, L IndexW, X, Y, Z