Uniden EXS 2050 manual Setting up the base unit, Choose the best location

Page 8

Setting up the base unit

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

•You should charge your handset for 15-20 hours before using the phone.

•The location should be close to both a phone jack and continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

5

Image 8

Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneBattery use time per charge When the battery charge becomes lowCleaning the charging contacts Do not use any liquids or solventsMaking a call Other OperationsReceiving a call From the handsetFrom the base Ringer muteAdjusting the volume Handset ringer tone and volumeMute Flash and Call WaitingRedialing a call Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number Way conferencing When speaking on the handsetWhen speaking on the base Integrated answering device Setting up your answering system Turning the answering system on/offSetting your greeting Preset MessageRecording a personal outgoing message Greeting Choosing between the two outgoing messagesSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoDeleting individual messages Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you W, X, Y, Z IndexK, L