Uniden EXS 2050 manual Remote room monitor

Page 34

You cannot use # and * while the new messages are playing. Press # then 5 to stop message playback first and go to step 5.

Remote room monitor

You can call your answering system from any touch-tone phone to monitor sounds in the room where your base is installed.

1 Call your telephone number.

2 While the greeting message is played, press # and your PIN code.

3 The answering system begins announcing the time and day.

4 Press # then 5 to stop the messages.

5 Press # then * . You hear sounds in the room where your phone is installed. After 15 seconds, the answering system returns to the command waiting mode.

6 Press # then * to monitor the room for another 15 seconds. Select another remote function or hang up to exit the system. The answering system automatically returns to standby.

31

Image 34

Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Base unit Read this firstHandset Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneCleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsMaking a call Other OperationsFrom the base Receiving a callFrom the handset Ringer muteAdjusting the volume Handset ringer tone and volumeRedialing a call Flash and Call WaitingMute Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number When speaking on the base When speaking on the handsetWay conferencing Integrated answering device Setting up your answering system Turning the answering system on/offRecording a personal outgoing message Greeting Setting your greetingPreset Message Choosing between the two outgoing messagesSelecting the message record time Announce only featureSelecting a PIN code Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting individual messages Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code To attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you K, L IndexW, X, Y, Z