Uniden EXS 2050 manual Receiving a call, From the handset, From the base, Ringer mute

Page 16

When you receive a call during a page or memory dialing operation, press

talk to answer the call.

The base microphone is located under the phone. Position yourself as near to the base as possible and speak clearly.

Receiving a call

From the handset

Handset on the base

1	The phone rings. The talk/batt LED
	flashes.
2	Pick up the handset and begin
	speaking.
3	To hang up, press		talk	or return
	the handset to the base.
Handset off the base
1	Phone rings. The talk/batt LED
	flashes.
2	Press	talk or any key (except
	mute	) and begin speaking.
3	To hang up, press		talk	or return
	the handset to the base.
From the base
1	The phone rings. The status LED
	on the base flashes.
2	Press	speaker and begin speaking.
3	To hang up, press		speaker .

status LED

Microphone

Ringer mute

	You can temporarily mute the handset’s ringer by	pressing
13	mute when the phone rings. You may still press talk	to answer
13	the call.

Image 16

Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Base unit Read this firstHandset Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneBattery use time per charge When the battery charge becomes lowCleaning the charging contacts Do not use any liquids or solventsMaking a call Other OperationsReceiving a call From the handsetFrom the base Ringer muteAdjusting the volume Handset ringer tone and volumeRedialing a call Flash and Call WaitingMute Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number When speaking on the base When speaking on the handsetWay conferencing Integrated answering device Setting up your answering system Turning the answering system on/offSetting your greeting Preset MessageRecording a personal outgoing message Greeting Choosing between the two outgoing messagesSelecting the message record time Announce only featureSelecting a PIN code Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoDeleting individual messages Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you K, L IndexW, X, Y, Z