Uniden EXS 2050 manual Troubleshooting, Symptom Suggestion

Page 38

TROUBLESHOOTING YOUR NEW PHONE

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom	Suggestion
The status LED won't • Make sure the AC adapter is plugged
come on when the	into the base unit and wall outlet.
handset is placed in	• Make sure the handset is properly
the base unit.	seated in the base unit.
	• Make sure the charging contacts on the
	handset and base unit are clean.

The audio sounds	• Press channel to help eliminate
weak and/or scratchy.	background noise.

•Make sure that the base unit antenna is in a vertical position.

•Move the handset and or base unit to a location away from metal objects or appliances and try again.

•Make sure that you are not too far from the base.

Can't make or receive	• Check both ends of the base unit
calls.	telephone line cord.
	• Make sure the AC adapter is plugged
	into the base unit and wall outlet.
	• Disconnect the AC adapter for a few
	minutes, then reconnect it.
	• Make sure talk is pressed.

The handset doesn't	• The battery pack may be weak. Charge
ring or receive a page.	the battery on the base unit for 15-20
	hours.
	• The handset may be too far away from
	the base unit.
	• Place the base unit away from
	appliances or metal objects.
	• Make sure the ringer on/off switch is set
	to on.

35

Image 38

Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneCleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsMaking a call Other OperationsFrom the base Receiving a callFrom the handset Ringer muteAdjusting the volume Handset ringer tone and volumeMute Flash and Call WaitingRedialing a call Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number Way conferencing When speaking on the handsetWhen speaking on the base Integrated answering device Setting up your answering system Turning the answering system on/offRecording a personal outgoing message Greeting Setting your greetingPreset Message Choosing between the two outgoing messagesSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting individual messages Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code To attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you W, X, Y, Z IndexK, L