Uniden EXS 2050 manual Battery use time per charge, When the battery charge becomes low

Page 14

Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.

Battery use time (per charge)

From fully charged

Six hours coutinuous use

Ten days when the handset is in the standby mode

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the battery charge becomes low, talk/batt LED blinks. If the phone is in use, the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Cleaning the charging contacts

To maintain a good charge, it is important to clean the charging contacts on the handset and base unit with a dry cloth about once a month.

Do not use any liquids or solvents.

11

Image 14
Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneCleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsMaking a call Other OperationsFrom the base Receiving a callFrom the handset Ringer muteAdjusting the volume Handset ringer tone and volumeMute Flash and Call WaitingRedialing a call Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number Way conferencing When speaking on the handsetWhen speaking on the base Integrated answering device Setting up your answering system Turning the answering system on/offRecording a personal outgoing message Greeting Setting your greetingPreset Message Choosing between the two outgoing messagesSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting individual messages Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code To attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you W, X, Y, Z IndexK, L