Uniden EXS 2050 manual Deleting a message, Voice memo, Deleting individual messages

Page 31
voice memo
voice memo

When you press delete , you are permanently deleting the message and the message cannot be replayed.

The voice memo function is completely independent of the outgoing message.

It’s handy for leaving others a quick message.

Deleting a message

ªDeleting individual messages

1Press play/stop to review your message.

2 If you decide to delete a message, press delete anytime during the message. The system beeps and immediately goes to the next message.

ªDeleting all messages

Press and hold delete while the system is in standby. A tone sounds when all messages are deleted.

If there is a message you have not reviewed, you cannot delete all messages at once.

Voice memo

The voice memo function allows the user to record a message (up to 10 minutes) on the base.

A voice memo message will be stored as a typical recorded message.

Microphone

Position yourself as near to the base as possible and speak clearly.

1 Press and hold until you hear a tone. The message counter LED blinks.

2 Speak into the microphone.

3 When you have finished, press or play/stop to

stop recording. The system returns to standby.

4 To play voice memo, press

play/stop .

28

Image 31
Contents Page Introduction FeaturesTalk Flash Controls and functions43 44 45 Contents Base unit Read this firstHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Use only Uniden Battery BT-905 supplied with your phone Installing the handset battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the charging contactsOther Operations Making a callRinger mute Receiving a callFrom the handset From the baseHandset ringer tone and volume Adjusting the volumeRedialing a call Flash and Call WaitingMute Traveling out-of-range Using the page featureStoring phone numbers Chain dialing Making calls with memory dialing Memory dialingErasing a stored phone number When speaking on the base When speaking on the handsetWay conferencing Integrated answering device Turning the answering system on/off Setting up your answering systemChoosing between the two outgoing messages Setting your greetingPreset Message Recording a personal outgoing message GreetingSelecting the message record time Announce only featureSelecting a PIN code Setting ring time switch Playing your messages Using your answering systemSkipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messagesRecording a conversation Command Function # then Repeat Remote access away from homeRemote room monitor Changing the digital security code To remove the beltclip Installing the beltclipHeadset installation To attach the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion At Uniden, we’ll take care of you K, L IndexW, X, Y, Z