Uniden EXS 2050 Selecting the message record time, Selecting a PIN code, Announce only feature

Page 27

Press and hold

skip or

repeat to scroll through numbers on the display.

Selecting the message record time

You can set your answering system to record messages between one to four minutes long.

One minute option: move the REC TIME switch to 1.

Four minute option:
move the REC TIME	REC TIME
switch to 4.	ANN/4/1
switch to 4.

ªAnnounce only feature:

The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.

The message counter LED displays “ ” when system is on standby.

The prerecorded outgoing message for Announce only feature is:

"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps.

1 On the base, press and hold pin until a tone sounds and the LED

displays .

2 To set the first number, press

skip or repeat

repeatedly to scroll from 0 to 9. When the desired number appears in the display, press pin .

skip/

3 To set the second number, press

skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press

pin . Then the entered PIN is announced.

24

Image 27

Contents Page Introduction FeaturesTalk Flash Controls and functions43 44 45 Contents Read this first Base unitHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Use only Uniden Battery BT-905 supplied with your phone Installing the handset battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the charging contactsOther Operations Making a callRinger mute Receiving a callFrom the handset From the baseHandset ringer tone and volume Adjusting the volumeFlash and Call Waiting Redialing a callMute Traveling out-of-range Using the page featureStoring phone numbers Chain dialing Making calls with memory dialing Memory dialingErasing a stored phone number When speaking on the handset When speaking on the baseWay conferencing Integrated answering device Turning the answering system on/off Setting up your answering systemChoosing between the two outgoing messages Setting your greetingPreset Message Recording a personal outgoing message GreetingAnnounce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Playing your messages Using your answering systemSkipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messagesRecording a conversation Command Function # then Repeat Remote access away from homeRemote room monitor Changing the digital security code To remove the beltclip Installing the beltclipHeadset installation To attach the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion At Uniden, we’ll take care of you Index K, LW, X, Y, Z