Uniden EXS 2050 Setting your greeting, Preset Message, Choosing between the two outgoing messages

Page 26

5 The LED displays or . Press skip or repeat until you hear the correct AM/PM setting.

6 Press clock again to end the time/day setting.

The EXS 2050 announces the time that you have set.

You can record a greeting up to 30 seconds.

Setting your greeting

When you receive a call, the answering system automatically plays either a preset message or your own greeting.

ªPreset Message

The following message is prerecorded:

"Hello, no one is available to take your call. Please leave a message after the tone."

ª Recording a personal outgoing message (Greeting)

1 Press and hold greeting until you hear a tone. Start recording your message immediately after you hear the tone end.

2 When you finish recording your message, press greeting or play/stop .

A tone sounds and your message plays back on the phone.

Position yourself as near to the base as possible and speak clearly when recording your outgoing message.

ªChoosing between the two outgoing messages

1Press greeting to play the outgoing message.

2 Press greeting again while the message is played. This switches between the two options.

23

Image 26
Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneCleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsMaking a call Other OperationsFrom the base Receiving a callFrom the handset Ringer muteAdjusting the volume Handset ringer tone and volumeMute Flash and Call WaitingRedialing a call Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number Way conferencing When speaking on the handsetWhen speaking on the base Integrated answering device Setting up your answering system Turning the answering system on/offRecording a personal outgoing message Greeting Setting your greetingPreset Message Choosing between the two outgoing messagesSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting individual messages Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code To attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you W, X, Y, Z IndexK, L