If you have not recorded your personal outgoing message when you turn the answering system on, the preset message is automatically set. To set your personal message, see page 23.
Holding skip 
or
repeat 
to scroll through days, hours, minutes, etc.
If you don't set the clock within two minutes, the system returns to standby.
Setting up your answering system
Turning the answering system on/off
1 To turn the answering system on, press answer on/off .
The current greeting message is played and a tone sounds.
2 To turn the answering system off, press answer on/off again.
When the answering system is full, FL displays on the base and the system announces “No remaining time”. You should delete some messages so that the system can record new messages.
Setting the clock
The clock on the EXS 2050 Answering System starts when power is applied to the base. Follow these steps to set the clock to the correct time.
1 Press and hold clock until a tone sounds.
2 First, press skip 
or repeat 
repeatedly until the correct day of the week is announced. (Numbers 
through 
display on the base as each day is announced.) Press clock again to select the day.
skip/ 
3 Next, press skip 
or repeat 
repeatedly until you hear the correct hour setting. Numbers 
through 
display on the base as each hour is announced. Press clock again to select the correct time.
4 Press skip | or repeat | repeatedly | until you hear |
the correct time setting. Numbers | through | display on | |
the base as each minute is announced. Press | clock again to | ||
select the correct time. |
| 22 | |
|
|
| |