Uniden EXS 2050 manual Direct wall plate mounting

Page 12

If you have wall mounted the base, you must remove the beltclip to charge the handset facing forward.

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise

180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is

up and the symbol is pointed down. The retainer holds the handset

in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices for the wall material where the base unit will be placed.

TOP

1 Insert two mounting screws

 

 

 

 

 

 

 

3/16 in.

 

 

 

 

 

 

 

into the wall, (with their

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate anchoring device),

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-15/16 inches apart. Allow

 

 

 

 

 

 

 

 

about 3/16 of an inch between

 

 

 

 

 

 

 

3-15/16 in.

the wall and screwheads for

 

 

 

 

 

 

 

 

mounting the phone.

 

 

 

 

 

 

 

 

2 Refer to steps 1 through 9 on

 

 

 

 

 

 

 

 

page 8 and 9 to mount the

 

 

 

 

 

 

 

 

telephone.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Features IntroductionControls and functions Talk Flash43 44 45 Contents Read this first Base unitHandset Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phoneBattery use time per charge When the battery charge becomes lowCleaning the charging contacts Do not use any liquids or solventsMaking a call Other OperationsReceiving a call From the handsetFrom the base Ringer muteAdjusting the volume Handset ringer tone and volumeFlash and Call Waiting Redialing a callMute Using the page feature Traveling out-of-rangeStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number When speaking on the handset When speaking on the baseWay conferencing Integrated answering device Setting up your answering system Turning the answering system on/offSetting your greeting Preset MessageRecording a personal outgoing message Greeting Choosing between the two outgoing messagesAnnounce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memoDeleting individual messages Deleting all messagesRecording a conversation Remote access away from home Command Function # then RepeatRemote room monitor Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion At Uniden, we’ll take care of you Index K, LW, X, Y, Z
Top Page Image Contents