Philips AZ1065 manual Cassete Recorder, Erasing a program You can erase the program by

English

AZ 1065 /17 page 14

CD PLAYER	CASSETE RECORDER
Erasing a program
You can erase the program by:

–pressing STOP 9 once in the STOP position;

–pressing STOP 9 twice during playback;

–pressing the CD door open;

–switching to another source: TAPE/TUNER.

• The display shows ' ' briefly.

CD player and CD handling
• The lens of the CD player should never be touched!
• If the CD player cannot read CDs correctly, use a commonly	X
available cleaning CD to clean the lens before taking the set to
repair. Other cleaning methods may destroy the lens.

•Sudden changes in the surrounding temperature can cause condensation to cloud over on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.

•Always keep the CD compartment closed to avoid dust on the lens.

•To take a CD out of its box, press the center spindle while

lifting the CD. Always pick up the CD by the edge and return the CD to its box after use to avoid scratching and dust.

• To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc.

• Never write on a CD or attach any stickers to it.

PLAYING A CASSETTE

1.Select TAPE source.

™The display shows throughout tape operation, and the function indication lights up.

2.Press STOP•OPEN 9/ to open the cassette door.

3.Insert a recorded cassette and close the cassette door.

4.Press PLAY 1 to start playback.

5.To pause playback, press PAUSE ;. To resume, press the key again.

6.By pressing SEARCH 5 or 6 fast winding of the tape is possible in both directions.

7.To stop the tape, press STOP•OPEN 9/.

–The keys are automatically released at the end of the tape and

the indication and function light go out, except if PAUSE ; has been activated.

D BB AZ 1065

14