TAB 8, 16 | TAB 7, 15 | TAB 6, 14 | TAB 5, 13 | TAB 4, 12 | TAB 3, 11 | TAB 2, 10 |
SOUNDDOCK® 10 DIGITAL MUSIC SYSTEM
English
Problem | What to do |
|
|
I do not hear any sound | • Make sure the power cord is properly connected on the back of the SoundDock 10 system and that |
from the SoundDock 10 | the system is plugged into a live AC outlet. |
system. | • Press the source button (dock or AUX) on the remote for the source you are using. |
| |
| • Press the Play/Pause button on the remote control. |
| • Increase the system volume. |
| • If listening to a device connected to AUX IN, increase the volume on the device. |
| • Remove your iPod/iPhone from the dock, wait 5 seconds, then reseat it. |
| • Unplug the power cable for 1 minute, then plug it back in to reset the system. |
|
|
My iPod/iPhone is not | • Make sure the power cord is properly connected on the back of the unit. |
charging. | • Make sure the system is plugged into a live AC outlet. |
|
|
I cannot navigate the | • Make sure that you have created playlists on your iPod/iPhone. |
playlists on my iPod/ |
|
iPhone. |
|
|
|
My iPod/iPhone does not | • Make sure there is a clear path between the remote and the system. |
respond to the remote | • Using a clean, dry cloth, wipe the small lens on the front end of the remote. |
control. | • Try the remote from a different location. You may be experiencing interference from bright room |
| |
| lights or sunlight. |
| • Remove your iPod/iPhone from the dock, wait 5 seconds, then reseat it. |
| • Make sure the remote battery is installed correctly or replace it if it is old (refer to page 6). |
|
|
My system does not | • Unplug the power cable for 1 minute, then plug it back in to reset the system. |
respond to any controls. | • Contact Bose® Customer Service. |
|
|
8