Meridian America DSP33 manual Available accessories

Page 13

Available accessories

The DSP33 is shipped ready to be used as the front speakers in a small Meridian Digital Theatre with a Meridian DVD Player (such as the 800 or 580) or a Meridian Digital Surround Controller (such as the 861, 568, or 561).

Other applications, and some advanced features, may require one or more of the following accessories, which can be purchased from your Meridian dealer.

Meridian System Remote.

512 Remote Eye for remote control reception.

D5 lead for connecting between the 512 and DSP33.

Additional S5 leads (8m and 14m).

511 S-patch box if connecting more than two DSP33s to a 561 Digital Surround Controller or 568 Digital Surround Processor.

Introduction

8

Image 13
Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction DSP33 Digital Loudspeaker System Digital Signal ProcessingDSP33 drivers Meridian High Resolution MHR Power amplifiersCabinet Mounting optionsMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingPositioning the digital loudspeakers Safety warningsTo position the digital loudspeakers To avoid overheatingTo wall mount the digital loudspeakers To obtain the best soundTo reset the configuration of the digital loudspeaker Connecting the loudspeakersBack panel Communications connections Digital connectionsTo connect two DSP33 loudspeakers in a Meridian system Connecting the digital loudspeakersTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System Selecting a source To switch to standbyTo select a source Adjusting the volume To reset the balance to the centre Adjusting the balance or phaseTo change the phase To change the balanceConfiguring the DSP33 loudspeakers using a computer To install the Meridian Configuration program Meridian Configuration programRequirements Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume To set up sources Setting up sourcesTo configure the source options Loudspeakers using Advanced To save the current settings Completing the configurationTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Green indicator on back panel is flashing Configuring the DSP33 does not have any effectCentre not working Unit stays in standby light is dimSound is odd or mono Only the master loudspeaker playsService Service and guaranteeGuarantee Troubleshooting Index Index