Meridian America manual Configuring the DSP33 Loudspeakers using a Computer, Troubleshooting

Page 5

Configuring the DSP33
loudspeakers using a
computer	23

Describes how to configure the digital
loudspeakers using the Meridian			Troubleshooting	35
Configuration program.			Troubleshooting	35

The Meridian Configuration program	24
Running the Meridian Configuration
program	25
Creating a new settings file	27
Changing the setup options	29
Setting up sources	31
Completing the configuration	34

Preface

Provides suggested solutions to typical problems.

Troubleshooting	36
Service and guarantee	39
Index	41

iv

Image 5

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction DSP33 drivers Digital Signal ProcessingDSP33 Digital Loudspeaker System Meridian High Resolution MHR Power amplifiersCabinet Mounting optionsMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingPositioning the digital loudspeakers Safety warningsTo position the digital loudspeakers To avoid overheatingTo wall mount the digital loudspeakers To obtain the best soundBack panel Connecting the loudspeakersTo reset the configuration of the digital loudspeaker Communications connections Digital connectionsTo use a DSP33 loudspeaker as a centre speaker Connecting the digital loudspeakersTo connect two DSP33 loudspeakers in a Meridian system Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To select a source To switch to standbySelecting a source Adjusting the volume To reset the balance to the centre Adjusting the balance or phaseTo change the phase To change the balanceConfiguring the DSP33 loudspeakers using a computer Requirements Meridian Configuration programTo install the Meridian Configuration program Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume To configure the source options Setting up sourcesTo set up sources Loudspeakers using Advanced To store the settings to the DSP33 loudspeaker Completing the configurationTo save the current settings Troubleshooting Troubleshooting Green indicator on back panel is flashing Configuring the DSP33 does not have any effectCentre not working Unit stays in standby light is dimSound is odd or mono Only the master loudspeaker playsGuarantee Service and guaranteeService Troubleshooting Index Index