Meridian America DSP33 manual To obtain the best sound, To wall mount the digital loudspeakers

Page 17

Setting up the DSP33 Digital Loudspeaker System

To obtain the best sound

For best results adjust the position of the loudspeakers while listening to music.

If possible, have the most acoustically absorbent wall in the room behind the front speakers. Ideally have each DSP33 at least 0.5m (20") from a corner.

If the speakers are mounted on stands, position them approximately 0.25m (12") from the wall.

If you are using the speaker as a centre channel, place the speaker centrally between the main left-right pair and, if possible, arrange for the tweeters of the three speakers to be approximately the same height. The plinth allows the centre channel to tilt towards the listener for optimum imaging.

To wall mount the digital loudspeakers

The DSP33 has been designed to be secured with an OmniMount 75 Series wall bracket, details of which may be obtained from OmniMount Systems, USA (818-766-9000). The mounting bolts are shown on the back panel. These are M6 Allen Bolts. Do not use any other bolt for the OmniMount bracket. Please follow the instructions for fitting provided with the bracket. It is entirely the responsibility of the installer to ensure that the DSP33 is securely fastened.

No other bolts should be undone on the rear panel.

Caution: The DSP33 is heavy for its size.

12

Image 17

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction DSP33 drivers Digital Signal ProcessingDSP33 Digital Loudspeaker System Meridian High Resolution MHR Power amplifiersCabinet Mounting optionsMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingPositioning the digital loudspeakers Safety warningsTo position the digital loudspeakers To avoid overheatingTo wall mount the digital loudspeakers To obtain the best soundBack panel Connecting the loudspeakersTo reset the configuration of the digital loudspeaker Communications connections Digital connectionsTo use a DSP33 loudspeaker as a centre speaker Connecting the digital loudspeakersTo connect two DSP33 loudspeakers in a Meridian system Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To select a source To switch to standbySelecting a source Adjusting the volume To reset the balance to the centre Adjusting the balance or phaseTo change the phase To change the balanceConfiguring the DSP33 loudspeakers using a computer Requirements Meridian Configuration programTo install the Meridian Configuration program Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume To configure the source options Setting up sourcesTo set up sources Loudspeakers using Advanced To store the settings to the DSP33 loudspeaker Completing the configurationTo save the current settings Troubleshooting Troubleshooting Green indicator on back panel is flashing Configuring the DSP33 does not have any effectCentre not working Unit stays in standby light is dimSound is odd or mono Only the master loudspeaker playsGuarantee Service and guaranteeService Troubleshooting Index Index