Meridian America manual Centre not working, Configuring the DSP33 does not have any effect

Page 42

❍Ensure that the receiver uses well-screened antenna cable.

❍Relocate the receiver with respect to the DSP33.

❍Connect the receiver and this product to different AC outlets.

❍If the problem persists contact your dealer.

Centre not working

There may be a connection problem.

❍Check that the channel switch is set to LEFT/CENTRE.

Configuring the DSP33 does not have any effect

Make sure that you are configuring the DSP33 used as the master digital loudspeaker in the system. This determines the configuration of all digital loudspeakers in the system.

Green indicator on back panel is flashing

This normally indicates that the DSP33 is overheating, and that it has shut down to cool down. If the DSP33 is cold, it may indicate a fault.

Meridian Configuration program repeatedly fails to talk to the loudspeaker

❍Check that you have selected a COMMS port.

❍Check that no other program currently running is using the COMMS port.

❍Check that it is connected correctly.

❍Turn off the DSP33 for a few seconds and turn back on, then retry.

❍Quit from all other programs and retry.

❍Reboot the computer and retry.

❍Ensure you are using the serial lead supplied with the product, or a null modem cable.

❍If you are using a laptop try turning off the screensaver or power management software.

Unit stays in standby – light is dim

❍Check that it is connected correctly.

❍Turn the system on from another Meridian product in the system.

Troubleshooting

37

Image 42

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Configuring the DSP33 Loudspeakers using a Computer TroubleshootingIntroduction Digital Signal Processing DSP33 Digital Loudspeaker SystemDSP33 drivers Cabinet Power amplifiersMeridian High Resolution MHR Mounting optionsMeridian Comms Sample configurations Meridian Digital Compact TheatreDSP33 Digital Loudspeaker System Other applicationsSpecification and accessories SpecificationAvailable accessories Setting up the DSP33 Digital Loudspeaker System Unpacking Radio interferenceTo position the digital loudspeakers Safety warningsPositioning the digital loudspeakers To avoid overheatingTo obtain the best sound To wall mount the digital loudspeakersConnecting the loudspeakers To reset the configuration of the digital loudspeakerBack panel Digital connections Communications connectionsConnecting the digital loudspeakers To connect two DSP33 loudspeakers in a Meridian systemTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To switch to standby Selecting a sourceTo select a source Adjusting the volume To change the phase Adjusting the balance or phaseTo reset the balance to the centre To change the balanceConfiguring the DSP33 loudspeakers using a computer Meridian Configuration program To install the Meridian Configuration programRequirements Running the Meridian Configuration program ProgramTo select which loudspeaker to configure To connect the serial cableCreating a new settings file To display the settings To display or edit the settingsChanging the setup options To change the setup optionsStart volume Setting up sources To set up sourcesTo configure the source options Loudspeakers using Advanced Completing the configuration To save the current settingsTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Centre not working Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Unit stays in standby light is dimOnly the master loudspeaker plays Sound is odd or monoService and guarantee ServiceGuarantee Troubleshooting Index Index